ฉันจะตั้งค่าไคลเอนต์ VPN ให้เข้าถึงเซิร์ฟเวอร์ VPN ระยะไกลได้อย่างไร

Good morning, I created LAN1 with an OpenVPN server on an OpenWrt router and LAN2 with a Cudy LT500 OpenVPN client router. The VPN (TUN) closes but I can’t ping LAN2 from LAN1. From within Cudy, I can ping devices on LAN1 and those addressed to the VPN network via the VPN interface, but from the Cudy LAN interface, however, I can’t. From LAN1, I can ping the server-side VPN interface but not the Cudy-side VPN interface or the Cudy-side LAN subnet. Basically, the VPN isn’t redirected to the Cudy LAN. I’ve tried every possible Cudy setting to no avail. It seems there’s a missing network connecting the VPN to the LAN. Do you have any suggestions? Is there any way to access it via SSH to manually add the missing routes? If so, how? Thanks.

@Dear TEN,
OK, I will reply you via email.

“Current firmware (at least in WISP) frequently drops WireGuard then leaks IP as discussed (and also reported by others) on what today is https://www.cudy.com/de-de/blogs/faq/wie-stelle-ich-den-vpn-client-ein-um-auf-einen-remote-vpn-server-zugreifen?page=4#Comments-589223624948 – as requested I’ve sent all details to sam at cudy dot com some 6 weeks ago and been asked to wait, but never received confirmation, follow-up or word of a fix”

Current firmware (at least in WISP) frequently drops WireGuard then leaks IP as discussed (and also reported by others) on what today is https://www.cudy.com/de-de/blogs/faq/wie-stelle-ich-den-vpn-client-ein-um-auf-einen-remote-vpn-server-zugreifen?page=4#Comments-589223624948 – as requested I’ve sent all details to sam at cudy dot com some 6 weeks ago and been asked to wait, but never received confirmation, follow-up or word of a fix.

@Dear TEN,
Sorry, please tell me details about the problem you encountered.
“Any developments or requests for information as to “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”, currently on Comments pages 3 & 4 below?”

Any developments or requests for information as to “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”, currently on Comments pages 3 & 4 below?