Cudy Home    Access Points    Outdoor AP    Outdoor AC1200 Gigabit Wireless Access Point, Model: AP1300 Outdoor

Outdoor AC1200 Gigabit Wireless Access Point, Model: AP1300 Outdoor

  •  

    Speedy Dual-Band AC1200 Wi-Fi

    With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices.

    Boosted Wi-Fi Coverage with Beamforming

    Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.

     

     

    Plug-and-Play Mesh Installation

    Simply Plug and Unplug for Mesh Setup

    Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)

    Leave the Rest to Adaptive Routing

    Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.

     

    Guide to Wiring and Physical Installation

    Gigabit Port with Two PoE Options

    Supports two powering methods—
    802.3at/af PoE (Max power: 11 W, Idle: 7.5 W)
    24-57 V Passive PoE (Adapter included, not waterproof)
    If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.

    Mounting Kit Included

    A mounting kit is included in the box, supporting—
    Wall-Mounting
    Pole-Mounting

     

     

    Specifications

     

    Hardware Features Highlights CPU: 880 MHz Dual-Core Processor
    Flash: 16 MB (128 Mbit)
    DDR: 128 MB (1 Gbit)
    Interface 1× Gigabit Ethernet (RJ-45) Port  (Support IEEE802.3af PoE and Passive PoE)
    1× Reset Button
    Power Supply 802.3af/at PoE
    24-57 V Passive PoE (+4,5pins; -7,8pins)
    Dimensions ( W×D×H ) 240×100×53.7mm
    Antenna Type

    2× Detachable Omni-directional Antennas

    Mounting Pole/Wall Mounting (Kits included)
    Wireless Function Wireless Standard:

    Wi-Fi 5 (802.11ac/n/g/b/a)

    Frequency: 5 GHz, 2.4 GHz
    Signal Rate:  5 GHz: Up to 867 Mbps
    2.4 GHz: Up to 300 Mbps
    Bandwidth 20/40/80 MHz

    Wireless Functions

    (Features with * require a Cudy AC as the gateway, Cudy AC's ETA is 2024 Q2)

    (Features with ** require a Cudy WR1300 or Cudy AC as the gateway)

    (Features with △ require a Cudy Mesh router/Mesh unit or Cudy AC as the gateway)

    Multiple SSID * 
    Captive Portal **
    Seamless Roaming Mesh△
    Self-Organizing Mesh△
    Band Steering*
    Auto Channel Optimization*
    Enable/Disable Wireless Radio
    Transmit Power Control 
    QoS (WMM)
    MU-MIMO
    Beamforming
    Rate Limit
    Reboot Schedule
    Wireless Schedule
    Wireless Encryption WPA-PSK
    WPA2-PSK
    WPA-PSK/WPA2-PSK
    Security Access Control
    Mac Filtering
    Wireless Isolation Clients
    Weather-Proof Dust/Water-Proof IP65 (Protection against any dust and low-pressure water from any directions)  
    Lightning Protection

    4 KV Lightning/Surge protection at the Ethernet port

     
    ESD 8 KV Contact / 15 KV Air ESD protection  
    Working Temperatures

    -20/60°C

    Extend -40/65°C (Booted up in advance. Performance may drop slightly.)

     
    Operating Mode Access Point
    Wi-Fi Router
    Range Extender
    WISP
    Mesh
    Package Content Outdoor Wireless Access Point
    2× Detahcable Wi-Fi Antennas
    48 V / 0.3 A Passive PoE Adapter
    Mounting Kits
    Installation Guide
    Environment Operating Temperatures: -20~60 °C (-4~140°F) ext. -40~65 °C (-40~149°F)
    Storage Temperature: -40–70 °C (-40–158 °F)
    Operating Humidity: 10–90% RH non-condensing
    Storage Humidity: 5–90% RH non-condensing
    System Requirements

    Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux

●  AC1200 MU-MIMO Dual Band Wi-Fi 
●  MT7621DAT+MT7613B+MT7603E
●  4-In-1: AP/RE/Router/WISP
●  1× Gigabit WAN/LAN
●  WPS Button, Reset Button
●  802.3at/af PoE or Passive PoE (Adapter Included)
●  Cudy Mesh
●  IP65, -20~60°C (Ext. -40~65 °C), 8/15 KV Contact/Air ESD + 4 KV Surge/Lightning Protection