Cudy Wi-Fi ルーターを WISP モードに設定するにはどうすればよいですか?

WISP モード:

WISPモードでは, ルーターは複数のユーザーがWISPからのインターネット接続を共有できます。このように, LANポートのデバイスは無線ポートを介してWISPから同じIPアドレスを共有します。WISPに接続すると, 無線ポートはWANポートとして機能します。

一般的なネットワークトポロジ:

 

ステップ1: ウェブブラウザを開いて http://cudy.net または http://192.168.10.1 

詳細については,  Cudy ルーターの Web インターフェイスにログインするにはどうすればいいですか?

 

ステップ2: クイックセットアップウィンドウがポップアップ表示されるので, 「ウィスプ「それから行く」「」。

 

ステップ3: タイムゾーン「」。

 

ステップ4: 拡張したいホストネットワークを選択します。「接続する'

 

またはクリック 一般設定->ウィスプ->有効にする 次に, 拡張するホスト ネットワークを選択します。

 

ステップ5: ホスト ネットワークのワイヤレス パスワードを入力します。

 

注記: 入力したワイヤレス パスワードが正しいことを確認してください。正しくない場合, 構成は成功しません。

 

ステップ6: ワイヤレス ネットワークの名前とパスワードをカスタマイズするか, デフォルトのままにします。

 

ステップ7: クリック "保存して適用」をクリックして設定を完了します。

 

ステップ8: システムが再起動するまで数秒お待ちください。ログイン ページが再び表示されたら, インターネットをお楽しみいただけます。

ブログに戻る

59件のコメント

Tried to change TTL, no change

z

Main router is a Vodafone station, I will try changing the TTL, don’t think it has Mac binding. Currently the network is shared by another wifi extender and works well.
I did try to wisp the hotspot from my phone and same results, ethernet shows unidentified network

z

@Dear z,
1. What is the brand and model of your existing Wi-Fi device?
2. You can try to customise the TTL of your Cudy to 64 when setting the WISP mode and check again.
3. Is it possible that your existing Wi-Fi device has the MAC binding function? If yes, you can disable it and try again.

Support

hi, when in wisp mode after connected can’t get ethernet connection, but when in repeater mode yes. how so?
can i connect another router in wisp mode through ethernet to have cablet internet inside the house, how to configure?

z

@Estimado Eduardo,
Gracias por contactar con el equipo de soporte de Cudy.
Si, los routers Cudy soportan configurar una VPN trabajando en modo WISP.

“Es posible configurar una VPN trabajando en modo WISP ??
Gracias”

Support

コメントを残す