Cudy Wi-Fi ルーターを WISP モードに設定するにはどうすればよいですか?

WISP モード:

WISPモードでは, ルーターは複数のユーザーがWISPからのインターネット接続を共有できます。このように, LANポートのデバイスは無線ポートを介してWISPから同じIPアドレスを共有します。WISPに接続すると, 無線ポートはWANポートとして機能します。

一般的なネットワークトポロジ:

 

ステップ1: ウェブブラウザを開いて http://cudy.net または http://192.168.10.1 

詳細については,  Cudy ルーターの Web インターフェイスにログインするにはどうすればいいですか?

 

ステップ2: クイックセットアップウィンドウがポップアップ表示されるので, 「ウィスプ「それから行く」「」。

 

ステップ3: タイムゾーン「」。

 

ステップ4: 拡張したいホストネットワークを選択します。「接続する'

 

またはクリック 一般設定->ウィスプ->有効にする 次に, 拡張するホスト ネットワークを選択します。

 

ステップ5: ホスト ネットワークのワイヤレス パスワードを入力します。

 

注記: 入力したワイヤレス パスワードが正しいことを確認してください。正しくない場合, 構成は成功しません。

 

ステップ6: ワイヤレス ネットワークの名前とパスワードをカスタマイズするか, デフォルトのままにします。

 

ステップ7: クリック "保存して適用」をクリックして設定を完了します。

 

ステップ8: システムが再起動するまで数秒お待ちください。ログイン ページが再び表示されたら, インターネットをお楽しみいただけます。

ブログに戻る

103件のコメント

I have the 4GvLTE N300 V3.0
I’ve got firmware 2.5.12 installed, but still no WISP
Could you send me the firmware that allows for Wisp please. I’m happy to test it if it’s Beta.

Lawson Joseph

Hi, can I use the wr1200 to feed wired internet into my lan from a starlink mini wifi router. I would like to not have a wire from the starlink into my existing lan which covers 4 floors of a concrete building. Is this compatible.
Thank you.

John

@Dear Paulo Ruben Brás Ferreira,
Yes, the AX1500 models will support WISP function if you update it to the latest firmware version. You can download the firmware via the link below.
https://www.cudy.com/pages/download-center/search
“Dear Cudy Support!
Is there any version of the firmware, that supports WISP on AX1500 router?
Thank you and Best regards!”

Support

@Dear Andrej Boyadjiev,
Our technical support has sent you the firmware via email. Please check.

“I cannot see the option for WISP. My router is just bought with SN: WR3600_EU V1.0. As I understand you can send me a firmware update with it. Thank you!”

Support

Dear Cudy Support!
Is there any version of the firmware, that supports WISP on AX1500 router?
Thank you and Best regards!

Paulo Ruben Brás Ferreira

コメントを残す