1. Download and unzip the file from here.
2. Download the latest firmware from the official website and rename it to 'recovery.bin'. Note: You must put it in the same file of Tftpd tools.
3. Power off your Router. Unplug the power adapter or press the POWER button.
4. Connect your computer the Router's LAN port with an Ethernet cable.
5. Configure your computer's IP address to be '192.168.1.88' manually.
6. Run 'tftp32.exe'.
7. Run 'netsh advfirewall set allprofiles state off' in the command line to disable Windows firewall, otherwise tftp will be blocked. Or you can disable the firewall on the Control Panel of your computer. As shown below.
8. Press the 'Reset' button/hole and hold it. Before the Router is powered on and before tftp start to download the firmware, don't release the 'Reset' button/hole.
9. Power on the Router.
10. When the Lights are all flashing fast, or when tftp start to download the firmware, you can release the 'Reset' button/hole.
11. When the light flashes slowly, the upgrade is complete.
12. Please recover your computer's IP address to be dynamic IP.
13. Done.
142 comentarios
@Dear In Out，
Please download the Cudy official firmware for tr3000-256mb-v1 via this link.
https://d1jvyy13vm72kv.cloudfront.net/device/upgrade/m_upgrade_TR3000_256MB_Flash-R103-2.4.21-20251009-115734-sysupgrade_44834.zip
“Dear Support,
Could you please provide the stock firmware/OEM firmware for cudy tr3000-256mb-v1. Thanks in advance.”
@Dear Teodor,
I don’t understand what do you want to do. If you want to flash the router back to Cudy official firmware according to this instruction and failed. Please describe the operation details and which step you fail. May be you can record a video to show me the problem.
“Help me with the firmware on the WR1300 V2 EU i can’t get it to the stock one and i evn have a backup one but i doesnt flash and i can get it to even to pass the signal from my wan to lan to my pc and it doesnt work help me”
Dear Support,
Could you please provide the stock firmware/OEM firmware for cudy tr3000-256mb-v1. Thanks in advance.
Help me with the firmware on the WR1300 V2 EU i can’t get it to the stock one and i evn have a backup one but i doesnt flash and i can get it to even to pass the signal from my wan to lan to my pc and it doesnt work help me
@Dear Planck,
Our technical support has sent you the firmware via email. Please check.
“Dear Support,
Could you please provide the stock firmware/OEM firmware for cudy tr3000-256mb-v1. Thanks in advance.”