WR5000
Planificación
Versión del modelo | ||
---|---|---|
Versión del modelo | WR5000 1.0 | |
CPU | ||
CPU | Chipset | MT7991 |
CPU Details | Dual-Core, ARM Cortex-A53 | |
Memory/Storage | ||
Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
DDR/RAM | 512 MB (4 Gbit) DDR3L | |
Wireless | ||
Wireless | 5 GHz Wi-Fi Speed | 4320 Mbps |
2.4 GHz Wi-Fi Speed | 688 Mbps | |
5 GHz Wi-Fi Streams | 3T3R (3×3 MIMO) | |
2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
Wi-Fi Antennas | 4× Fixed | |
5 GHz Antenna Gain Max | 5.5dBi | |
2.4 GHz Antenna Gain Max | 5.4dBi | |
FEM or PA/LNA |
|
|
Beamforming | True | |
Range Performance |
Max: 220 m (722 ft) Indoor WiFi range varies depending on the layout and wall materials. See Wall Performance spec for placement suggestions. |
|
Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
Interfaces | ||
Interfaces | 2.5G RJ45 Ports | 1 |
Gigabit RJ45 Ports | 4 | |
Ethernet Notes | The 2.5G port is WAN port, the Gigabit ports are LAN ports | |
LED |
|
|
Physical Buttons |
|
|
Power Input | DC Jack | |
Power | ||
Power | Power Methods | DC |
DC | 12V 1.5A | |
Power Adapter |
Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 1A DC |
|
Max Power Consumption (W) | 12W | |
Reliability | ||
Reliability | Environment |
|
Certifications | ||
Certifications | FCC, CE | |
Mechanical | ||
Mechanical | Installation |
|
Dimension |
183.3×109×35 mm 7.22×4.29×1.38 inches |
|
Package Content | ||
Package Content |
|
|
Ordering Information | ||
Ordering Information | Retail Package Dimension |
240×230×60 mm 9.45×9.06×2.36 inches |
Units per Carton | 20 | |
Carton Dimension |
49.5×32.5×48 cm 19.49×12.8×18.9 inches |
Versión del modelo | ||
---|---|---|
Versión del modelo | WR5000 1.0 | |
Wireless | ||
Wireless | Wi-Fi Standards | Wi-Fi 7 |
Max Wi-Fi Modulation | 4K-QAM | |
Wi-Fi Efficiency |
|
|
Max Capacity | 512 | |
Recommended Client Upper Limit | 200 | |
Max Wi-Fi Channel Width | 160 MHz | |
Wi-Fi Security | WPA/WPA2/WPA3 | |
Guest Network | 2.4 GHz, 5 GHz | |
WPS | True | |
General | ||
General | Operation Modes |
|
Mesh | Cudy Mesh | |
Mesh Backhaul |
|
|
Multi-Band Backhaul | true | |
WAN Mode |
|
|
Internet Failover Sequence |
|
|
Network | ||
Network | QoS | Per-User Rate Limiting |
DHCP |
|
|
IP Versions | IPv4/IPv6 | |
IPv6 Protocols |
|
|
IPTV/VLAN |
|
|
TTL Customization |
|
|
IGMP |
|
|
Forwarding |
|
|
Firewall |
|
|
Application Layer Gateway |
|
|
Utilities | ||
Utilities | VPN Server |
|
VPN Client |
|
|
DNS Options |
|
|
DNS over TLS Providers |
|
|
Wake on LAN | True | |
Online Detection | True | |
Management | ||
Management | All Devices Management |
|
Per-Devices Management |
|
|
Content Management |
|
|
System | ||
System | LED Control | ture |
Local Control Method |
|
|
Remote Control Method |
|
|
Firmware Upgrade |
|
|
Reliability |
|
|
Diagnostic Tools |
|
|
Languages |
|
|
Dashboard | ||
Dashboard | Panel |
|
Charts |
|
- El rendimiento de datos inalámbricos real variará como resultado de las condiciones de la red, las limitaciones del cliente y los factores ambientales, incluidos el diseño del edificio, los obstáculos y la ubicación del cliente.
- El rendimiento real de varios dispositivos puede verse afectado por los tipos de aplicaciones utilizadas, el ancho de banda total disponible y las capacidades de sus dispositivos. Conectar dispositivos Wi-Fi antiguos (estándares heredados) puede reducir la eficiencia general. El uso de funciones de eficiencia requiere dispositivos cliente compatibles que también admitan esas funciones. Encuentre más información sobre las funciones de eficiencia admitidas en la sección de software de la hoja de cálculo de Especificaciones.