1. Download and unzip the file from here.
2. Download the latest firmware from the official website and rename it to 'recovery.bin'. Note: You must put it in the same file of Tftpd tools.
3. Power off your Router. Unplug the power adapter or press the POWER button.
4. Connect your computer the Router's LAN port with an Ethernet cable.
5. Configure your computer's IP address to be '192.168.1.88' manually.
6. Run 'tftp32.exe'.
7. Run 'netsh advfirewall set allprofiles state off' in the command line to disable Windows firewall, otherwise tftp will be blocked. Or you can disable the firewall on the Control Panel of your computer. As shown below.
8. Press the 'Reset' button/hole and hold it. Before the Router is powered on and before tftp start to download the firmware, don't release the 'Reset' button/hole.
9. Power on the Router.
10. When the Lights are all flashing fast, or when tftp start to download the firmware, you can release the 'Reset' button/hole.
11. When the light flashes slowly, the upgrade is complete.
12. Please recover your computer's IP address to be dynamic IP.
13. Done.
142 comentarios
@Dear LongShu,
Currently, the TR3000 V1.0 has been updated with new Flash firmware, causing both the intermediate transition firmware and OpenWrt firmware to fail to boot properly. Please temporarily revert to version 2.4.7. We will provide a new intermediate firmware version later. Additionally, the OpenWrt forum needs to update its OpenWrt firmware. We can provide the corresponding patch. We haven’t located the GitHub submission portal yet; enthusiastic customers are welcome to help us find it.
“https://github.com/openwrt/openwrt Please fix the problem as soon as possible”
https://github.com/openwrt/openwrt Please fix the problem as soon as possible
@ Dear WINKZZZ,
目前TR3000 V1.0更换了新的Flash,导致中间过渡固件和OpenWrt固件都无法正常启动，暂时请先回退版本到2.4.7，我们后续会提供新的中间版本固件，另外也需要OpenWrt论坛更新其OpenWrt固件。我们可以提供相应的Patch. 还没有找到提交的Github入口，热心客户可以帮忙一起找找。
“TR3000-128MB刷入Cudy官方过渡OP固件cudy_tr3000-v1-sysupgrade.bin后，无法识别到IP（获取不到IP地址），192.168.1.1，192.168.10.1均无法访问，只能恢复到2.4.7官方固件，是最新购买的，请问是不支持刷官方过渡OP固件了吗？”
最新购买的TR3000-128M，无法使用降级到低版本，无法刷入过渡固件。
1. 只能降级到2.4.2，无法降级到2.3.7及以下，无论是web页面-固件升级操作还是tftp做recovery都不行，刷入后红灯慢闪，搜不到ssid。
2. web操作升级过渡固件也不行，无法开机。
目前，只能tftp先恢复到2.4.2/2.4.7。
TR3000-128MB刷入Cudy官方过渡OP固件cudy_tr3000-v1-sysupgrade.bin后，无法识别到IP（获取不到IP地址），192.168.1.1，192.168.10.1均无法访问，只能恢复到2.4.7官方固件，是最新购买的，请问是不支持刷官方过渡OP固件了吗？