The router's Wi-Fi name(SSID), Wi-Fi password and security options are pre-configured. The default SSID and password can be found on the device label. You can modify the wireless settings according to your needs.
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1. Use "admin" as a password to log in.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: Go to General Settings->Wireless page.
Smart Connect:
When Smart Connect is enabled, the router’s 2.4GHz and 5GHz networks share the same SSID (network name) and password.
Wireless 2.4G or 5G:
The 2.4GHz or 5GHz wireless network should be enabled. Simply uncheck the box if you don't want to use the wireless feature. All wireless settings won't work if the wireless function is disabled.
Wireless SSID and password:
Enter the new Wi-Fi name and Wi-Fi password you want to change.
Note: If you use a wireless device to change the wireless settings, you will be disconnected.
Encryption:
No Encryption, WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK (Recommend), WPA2-PSK/WPA3-SAE, WPA3-SAE.
Note: We don’t recommend you to change the default settings unless necessary.
Mode:
2.4GHz: 802.11b, 802.11b+g, 802.11b+g+n, 802.11b+g+n+ax
5GHz: 802.11a, 802.11a+n, 802.11a+n+ac, 802.11a+n+ac+ax
Note: If you find some clients have problems connecting to 5GHz of Wi-Fi 6 router, please update the client's wireless network card driver to the latest version. If still have problems, please adjust the wireless mode of the router to 5GHz (802.11a+n+ac).
Channel:
'Auto' by default. Select the channel you want to use from the drop-down list. This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems.
Channel Width:
'Auto' by default. Select the channel width from the drop-down list if necessary.
2.4GHz: 20MHz or 40MHz
5GHz: 20MHz, 40MHz or 80MHz
Transmit Power:
Maximum, Middle or Minimum
By default, it is 'Maximum', if you change to others, the Wi-Fi signal will decrease.
Note: We don’t recommend you to change the default settings unless necessary.
Hidden Network:
If you enable Hidden SSID, your SSID won't broadcast. When you search for local wireless networks, your SSID won't show up on your wireless device's Wi-Fi list, so you'll have to manually join the network.
83 comentarios
@Dear MN,
Did you update the beta firmware I sent you? If yes, please try to reset the router to factory default. Then reinstall it and try again.
“@Support
It’s strange that when I set Encryption to WPA2-PSK only, WPA is still active on the device, so the mode doesn’t seem to work properly. Can you fix this? WR3600”
@Support
It’s strange that when I set Encryption to WPA2-PSK only, WPA is still active on the device, so the mode doesn’t seem to work properly. Can you fix this? WR3600
@Dear MN,
Our technical support has sent you the beta firmware via email. Please check. You can update the firmware. We have deleted the TKIP when you set WPA2-PSK.
“@Support
https://www.cudy.com/en-eu/products/wr3600-1-0
WR3600 1.0”
@Support
https://www.cudy.com/en-eu/products/wr3600-1-0
WR3600 1.0
@Dear MN,
I need to check the model of your router. For TKIP problem. We can offer a new firmware. But BE3600 is not the model. We have WR3600, WR3600E, WR3600H and M3600, etc. The firmware are different.
“@Support
I am also interested in the reply to Hein De Lange. Could you please copy it here?"