Warnungen
Auf dieser Webseite wird die Software von Geräten aufgeführt, die das OpenWrt-System unterstützen. Bitte beachten Sie vor dem Herunterladen und Installieren der Software, dass es sich bei OpenWrt Project um ein Linux-Betriebssystem für eingebettete Geräte handelt. Anstatt zu versuchen, eine einzelne, statische Firmware zu erstellen, bietet OpenWrt ein vollständig beschreibbares Dateisystem mit Paketverwaltung. Dies befreit Sie von der vom Anbieter bereitgestellten Anwendungsauswahl und -konfiguration und ermöglicht Ihnen, das Gerät durch die Verwendung von Paketen an jede Anwendung anzupassen. Für Entwickler ist OpenWrt das Framework zum Erstellen einer Anwendung, ohne eine komplette Firmware darum herum erstellen zu müssen; Für Benutzer bedeutet dies die Möglichkeit einer vollständigen Anpassung, um das Gerät auf eine Art und Weise zu nutzen, die nie vorstellbar war.
Beschreibung
- Diese Datei kann nur verwendet werden, wenn Ihr Router unter der Cudy-Web-Benutzeroberfläche funktioniert.
- Wenn der Router bereits unter der OpenWRT-Benutzeroberfläche funktioniert, sollte der Benutzer ihn zuerst auf die offizielle Cudy-Firmware wiederherstellen. Und aktualisieren Sie dann den Router mit dieser Firmware.
- Wie kann ich den Router auf die offizielle Firmware von Cudy zurücksetzen? Bitte lesen Sie die Readme-Datei in der heruntergeladenen Datei.
Garantie:
Cudy erklärt hiermit
- Wir, Cudy, übernehmen keine Garantie für Software, die nicht von Shenzhen Cudy Technology Co., Ltd. veröffentlicht wurde.
- Wir übernehmen keine Garantie für Produkte, auf denen Software installiert ist, die nicht von Shenzhen Cudy Technology Co., Ltd. freigegeben wurde.
- Wenn Sie OpenWRT-Software verwenden müssen, empfehlen wir Ihnen, diese von der offiziellen Website von Cudy herunterzuladen.
Laden Sie die OpenWrt-Firmware herunter, um die Signaturprüfung zu entfernen: Drive
OpenWrt Firmware Finder (nicht von Cudy veröffentlicht): OpenWrt-Firmware-Auswahl
900 Kommentare
I don’t see an OpenWRT firmware for the AP3000 v1, I’ve attempted to use the firmware from OpenWRT directly, but it appears that they will not load due to missing signature. Any assistance is appreciated.
@Dear Kamil,
I think the firmware you downloaded is correct. Or you can’t upload it. So I suggest you to check if your computer’s IP address is obtained via DHCP? If not, please set it to DHCP. Because the manage IP address has been changed from 192.168.10.1 to 192.168.1.1. You need to login the web page of the router via new IP address.
“Hello Support Team,
I hope you’re doing well. I am experiencing an issue with my Cudy WR3000E router when attempting to upload a firmware file via the web interface:
Firmware Source: I downloaded the firmware file from a Google Drive link.
Upload Method: Web management interface, Firmware Upgrade section.
Problem: After the upload completes, the router becomes completely unresponsive (“bricked”). I cannot access the web interface, SSH, or any network services.
Attempts: I have tried this process twice, using the same firmware file each time, but the router bricks both times.
Could you please advise on:
Whether the firmware file I downloaded is correct and compatible with the WR3000E model.
A direct download link to an official firmware file, if available.
Thank you for your assistance.
Best regards,
Kamil”
Hello Support Team,
I hope you’re doing well. I am experiencing an issue with my Cudy WR3000E router when attempting to upload a firmware file via the web interface:
Firmware Source: I downloaded the firmware file from a Google Drive link.
Upload Method: Web management interface, Firmware Upgrade section.
Problem: After the upload completes, the router becomes completely unresponsive (“bricked”). I cannot access the web interface, SSH, or any network services.
Attempts: I have tried this process twice, using the same firmware file each time, but the router bricks both times.
Could you please advise on:
Whether the firmware file I downloaded is correct and compatible with the WR3000E model.
A direct download link to an official firmware file, if available.
Thank you for your assistance.
Best regards,
Kamil
@Dear David,
Our technical support has sent you the solutions via email. Please check.
“Hey,
I’m having a AP3000 V1 on Firmware-Version
2.4.4-20250808-093007
I woul like to install openwrt. But I cant install the files Provides. If I try to upload I do get the message “file not found” even the image from your google drive.
Pleas help me to install openwrt”
@Dear Bob,
Yes, WR1300 V1.0 supports OpenWrt firmware. Please do it.
“Hardware platform: Cudy wr1300 v1.0 . This hardware appears to be supported by OpenWRT, it just needs your signature applied or the ability to disable your signature checking on WebUI firmware update. I am looking to enable sshd”