1. Download and unzip the file from here.
2. Download the latest firmware from the official website and rename it to 'recovery.bin'. Note: You must put it in the same file of Tftpd tools.
3. Power off your Router. Unplug the power adapter or press the POWER button.
4. Connect your computer the Router's LAN port with an Ethernet cable.
5. Configure your computer's IP address to be '192.168.1.88' manually.
6. Run 'tftp32.exe'.
7. Run 'netsh advfirewall set allprofiles state off' in the command line to disable Windows firewall, otherwise tftp will be blocked.
8. Press the 'Reset' button/hole and hold it. Before the Router is powered on and before tftp start to download the firmware, don't release the 'Reset' button/hole.
9. Power on the Router.
10. When the Lights are all flashing fast, or when tftp start to download the firmware, you can release the 'Reset' button/hole.
11. When the light flashes slowly, the upgrade is complete.
12. Please recover your computer's IP address to be dynamic IP.
13. Done.
62 comments
Hi everyone! Is a little troublesome for me to use Windows system. I would like to know if there is a way to make it with Linux or macOS system.
@zyth
你好
请问你需要什么文件？
“文件没有了”
文件没有了
@Dear Wolker_cz,
We have uploaded the firmware of the router on the website. Please download it.
“Hi, where can I find stock firmware for 4G router LT700E v1? It is not published on official download page. https://www.cudy.com/pages/download-center/lt700e-1-0”
Hi, where can I find stock firmware for 4G router LT700E v1? It is not published on official download page. https://www.cudy.com/pages/download-center/lt700e-1-0