How to Recovery the Cudy Router From OpenWRT Firmware to Cudy Official Firmware?

1. Download and unzip the file from here

 

2. Download the latest firmware from the official website and rename it to 'recovery.bin'.  Note: You must put it in the same file of Tftpd tools.

3. Power off your Router. Unplug the power adapter or press the POWER button.

4. Connect your computer the Router's LAN port with an Ethernet cable.

5. Configure your computer's IP address to be '192.168.1.88' manually. 

6. Run 'tftp32.exe'.

7. Run 'netsh advfirewall set allprofiles state off' in the command line to disable Windows firewall, otherwise tftp will be blocked.

8. Press the 'Reset' button/hole and hold it. Before the Router is powered on and before tftp start to download the firmware, don't release the 'Reset' button/hole. 

9. Power on the Router. 

10. When the Lights are all flashing fast, or when tftp start to download the firmware, you can release the 'Reset' button/hole.

11. When the light flashes slowly, the upgrade is complete.

12. Please recover your computer's IP address to be dynamic IP. 

13. Done.

Back to blog

62 comments

Dear Angel,

Yes, you can do it. Please follow the steps on this instruction to do it.

“Hello recently i buy tr1200 us v.1 and flashed with the Intermediate Firmware can i flash back to official i see from comments below that it must be connected on the WAN Port?”

Support

Nevermind i found it!It was the wan port ! 1.Download tftp64.exe extract it put the firmware of the TR1200 renamed recovery in to the same extracted folder open the program don’t mess anything interface leave it close fw if you have windows press the reset button and hold it put the power and when the light starts flash quick leave it the program will send it u don’t have to look at the program look at led light of cudy TR1200.

Angel M

Hello recently i buy tr1200 us v.1 and flashed with the Intermediate Firmware can i flash back to official i see from comments below that it must be connected on the WAN Port?

Angel M

@Artem,
Уважаемый клиент!
Благодарим вас за обращение в службу поддержки Cudy.
Я думаю, что причина в том, что вы не можете получить доступ к серверу в вашей стране. Вы можете скачать инструмент TFTP из интернета. Кроме того, вы можете скачать прошивку в центре загрузки Cudy:
https://www.cudy.com/pages/download-center/search

“Первые 2 ссылки в инструкции ведут на несуществующие страницы”

Support Cudy

Первые 2 ссылки в инструкции ведут на несуществующие страницы

Artem

Leave a comment