1. Download and unzip the file from here.
2. Download the latest firmware from the official website and rename it to 'recovery.bin'. Note: You must put it in the same file of Tftpd tools.
3. Power off your Router. Unplug the power adapter or press the POWER button.
4. Connect your computer the Router's LAN port with an Ethernet cable.
5. Configure your computer's IP address to be '192.168.1.88' manually.
6. Run 'tftp32.exe'.
7. Run 'netsh advfirewall set allprofiles state off' in the command line to disable Windows firewall, otherwise tftp will be blocked. Or you can disable the firewall on the Control Panel of your computer. As shown below.
8. Press the 'Reset' button/hole and hold it. Before the Router is powered on and before tftp start to download the firmware, don't release the 'Reset' button/hole.
9. Power on the Router.
10. When the Lights are all flashing fast, or when tftp start to download the firmware, you can release the 'Reset' button/hole.
11. When the light flashes slowly, the upgrade is complete.
12. Please recover your computer's IP address to be dynamic IP.
13. Done.
142 comments
@tuanzi_awa,
你好，我们的技术支持工程师已经邮件联系你，请查看邮件。
“同，TR3000v1刷入OpenWRT后通过TFTP刷回官包，红白闪烁几十分钟未重启”
同，TR3000v1刷入OpenWRT后通过TFTP刷回官包，红白闪烁几十分钟未重启
Dear Sebastian,
Please try to google the tool and download it.
""Hello, the link for tftp32.exe above is still broken. I get the error “page not found”. Do you have the possibility to fix this?
Hello, the link for tftp32.exe above is still broken. I get the error “page not found”. Do you have the possibility to fix this?
@M
Dear customer,
Thank you for contacting Cudy support team.
Please try to shutdown the firewall and try again. Or you can try to find it on the internet. Or you can try to download it on the phone or pad then send it to the computer.
“The tft32 zip is not accessible for download. Could you point me to the right site?”