1. Download and unzip the file from here.
2. Download the latest firmware from the official website and rename it to 'recovery.bin'. Note: You must put it in the same file of Tftpd tools.
3. Power off your Router. Unplug the power adapter or press the POWER button.
4. Connect your computer the Router's LAN port with an Ethernet cable.
5. Configure your computer's IP address to be '192.168.1.88' manually.
6. Run 'tftp32.exe'.
7. Run 'netsh advfirewall set allprofiles state off' in the command line to disable Windows firewall, otherwise tftp will be blocked. Or you can disable the firewall on the Control Panel of your computer. As shown below.
8. Press the 'Reset' button/hole and hold it. Before the Router is powered on and before tftp start to download the firmware, don't release the 'Reset' button/hole.
9. Power on the Router.
10. When the Lights are all flashing fast, or when tftp start to download the firmware, you can release the 'Reset' button/hole.
11. When the light flashes slowly, the upgrade is complete.
12. Please recover your computer's IP address to be dynamic IP.
13. Done.
142 comments
> TR3000 v1 刷回官方固件（版本 2.3.7）遇到了同样的问题
TR3000 v1，按照文档中描述步骤，使用固件 2.3.7，已成功恢复设备。
using ac1200 white flashing fast but doesnt start download
“TR3000 v1 刷回官方固件（版本 2.3.7）遇到了同样的问题
1. 刷写完毕后，指示灯红白闪烁一直未重启
2. 手动重启后，指示灯亮白色。但是路由器无法链接，dhcp 情况下，不下发 IP 。路由器 ip 未知，路由器失联。"
我有同样的问题，请问如何解决？
@jv,
你好，我们的技术支持工程师已经邮件联系你，请查看邮件。
“TR3000 v1 刷回官方固件（版本 2.3.7）遇到了同样的问题
1. 刷写完毕后，指示灯红白闪烁一直未重启
2. 手动重启后，指示灯亮白色。但是路由器无法链接，dhcp 情况下，不下发 IP 。路由器 ip 未知，路由器失联。"
TR3000 v1 刷回官方固件（版本 2.3.7）遇到了同样的问题
1. 刷写完毕后，指示灯红白闪烁一直未重启
2. 手动重启后，指示灯亮白色。但是路由器无法链接，dhcp 情况下，不下发 IP 。路由器 ip 未知，路由器失联。