Cudy Whole Home Mesh system is built to eliminate dead zones and to provide uninterrupted Wi-Fi throughout your home. This article will guide you to build a mesh system step by step.
Preparation:
1. Ensure you own at least 2 Cudy products.
2. All Cudy products support mesh technology: Home Mesh-Cudy official website
3. Firmware is up-to-date: Download Center
4. Take them in the same room during configuration.
5. Reset all your Cudy products to factory default settings. (With the Power on, press and hold the RESET button with a pin for 6s, then release.)
6. Set up your primary router and make it connect to the internet.
Here we take M1800 and WR2100 as examples:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: On the System Status page, click on the "+" button.
Step 3: Press the WPS button on the M1800 and then press the WPS button on WR2100.
Main mesh unit: Flash white
Add-on mesh unit: Flash white and red alternately
Step 4: It will go to "Scanning", then " Connecting".
Step 5: Wait until the System LED of the add-on router turns into solid blue, then relocate WR2100.
Step 6: Success and enjoy the mesh network.
Note:
1. 4/5G router can only be set up as a Main mesh unit. For example:
2. You will not able to log into the web interface of the add-on mesh router. If you want to change settings, please click on "System Status"->"Mesh".
26 comments
@Ahmed,
Dear Ahmed,
Sorry to tell you that WR6500 doesn’t support Mesh function now. We have plan to add this feature next month. Please wait. For now, if you plan to connect them via wired cable, you can set the WR3000 to the Access Point mode, then connect to the WR6500’s LAN port. If you plan to connect them via WiFi, you can set the WR3000 to the Wireless extender mode to connect the 5GHz WiFi of WR6500. It will work too. Then you will be able to update the new firmware to support mesh function when the new firmware release.
“I want to setup a mesh network between wr6500 (main) and my old wr3000 (satellite) but there’s no + sign on the setup page for the wr6500.
Is it possible to add that feature? If not available already and I just can’t find it. Because it’s mentioned on the product page for the wr6500 that it supports whole home mesh.”
I want to setup a mesh network between wr6500 (main) and my old wr3000 (satellite) but there’s no + sign on the setup page for the wr6500.
Is it possible to add that feature? If not available already and I just can’t find it. Because it’s mentioned on the product page for the wr6500 that it supports whole home mesh.
@Julos
Dear Customer，
Thank you for contacting Cudy support team.
Yes, you can. Please reset the WR1300 to factory default. Then connect the WAN port of the WR1300 to the LAN port of the LT12 via cable. The mesh system will installed automatically.
“Can I connect the LT12 and WR1300 in mesh using the ethernet wired connection?
Thanks"
Can I connect the LT12 and WR1300 in mesh using the ethernet wired connection?
Thanks
@Xavier，
Dear Customer,
We have developed new firmware of WR1500 like other Cudy routers. It will be very easy to install Cudy mesh as the instruction on this article. I have sent you the firmware and instruction via email. Please refer to the instruction attached to update the firmware then reinstall the router and install mesh with them.
“I have 2 wr1500 routers running with the last firmware, both have de easymesh option, I want to connect them in a mesh network, but the interface is so diferent that the showed here, please help me to connect them properly to have a mesh network. Thanks”