僅限已升級至韌體的 Cudy 路由器支持Cudy APP管理的版本可以使用APP來管理。
因此，很有可能您的Cudy路由器尚未升級到支援APP管理的韌體版本。 >
掃描下方二維碼即可下載Cudy APP。 請下載最新的韌體版本進行升級。
下載中心< /p>
型號：Cudy的無線產品將逐步發布新韌體以支援APP管理。下表列出了部分已支援APP的產品型號。其他型號可能已經發布。請前往下載中心查看新韌體。
<樣式> td {white-space:nowrap;border:1pxsolid #dee0e3;font-size:10pt;font-style:normal;font-weight:normal;vertical -對齊：中間；斷字：正常；自動換行：正常；}
-->
<表格樣式="寬度：141px；"資料-mce-style ="寬度：141px;">
注意：所有韌體版本為2.x.x的Cudy路由器均支援Cudy APP管理。
請點選此處如果您在使用Cudy APP 時有任何問題或建議，可以反饋。 
39 則留言
I have the WR3000 with the latest firmware 2.4.19, but the app doesn’t have an option in settings for VPN. It goes WAN, LAN, Wi-Fi, etc, but nothing for VPN. I can activate/deactivate it just fine from PC, but I want to be able to do it from my mobile. From what I saw, there is supposed to be a setting for VPN too.
I have bought a Cudy C200P to control 4 ap3000 cudy but i would like to understand how i can manage it from the cudy app ( it doesn’t recognize the controller) and how i can set up a guest ssid that doesn’t have access to my lan.
Thank you
@Dear +584245982552,
Our technical support has sent you the solutions via email. Please check.
“Cuando actualizo el enrutador WR1500 de la versión 1.0.4-20241017-804431 a la última versión, solo parpadea y nunca se apaga, solo cuando lo desconecto de la electricidad.”
Cuando actualizo el enrutador WR1500 de la versión 1.0.4-20241017-804431 a la última versión, solo parpadea y nunca se apaga, solo cuando lo desconecto de la electricidad.
@Dear Franz,
Thank you for you feedback. We will follow the issues.
“I tried the WR3000e with WISP and it was possible to rename the clients.
Now I have changed to access point mode and mesh but the app does not allow to change the name.
If you have a lot of smart home devices, you dont know which one is it.
Why is this in AP Mode not possible?
By the way, in WISP Mode it was not possible to change the channels , even the 2.4 GHz which was not used for the WISP bridge. In AP Mode it is possible."