如果我無法存取 Cudy 路由器的 Web 介面，該怎麼辦？

有時您可能無法存取路由器的內建管理頁面 cudy.net。此故障可能會導致出現錯誤頁面，甚至根本沒有回應，即白屏。
1. 檢查路由器是否已上電並正常啟動。
您可以使用包裝中隨附的電源轉接器。如果您沒有使用此電源轉接器，請使用與路由器標籤上標註電壓相同的電源轉接器。電流必須至少為標籤上標註的額定電流。

上電後，等待約1分鐘設備啟動。此時，您可以使用手機或其他終端機嘗試搜尋路由器標籤上標示的SSID。

注意：如果等待超過3分鐘，仍然找不到路由器的預設SSID。請嘗試長按重設按鈕約3秒將路由器重設為出廠預設值。當 LED 閃爍時，您可以放開重置按鈕。然後路由器重啟後重試。
2.檢查確認終端已連接至路由器。 Wi-Fi密碼連線。 SSID 和密碼印在路由器的標籤上。如果有的話，您連接的LAN 連接埠的LED 將會亮起。 ) .

3.檢查終端的 TCP/IP 設定。 Windows 範例：
如果您已使用自訂 IP 位址和 DNS 設定配置了 PC 的無線網路介面卡。您應該切換回自動取得它們。然後，輸入ncpa.cpl 並選擇"確定"。 1">-在"網路"標籤下，雙擊"Internet 協定版本 4 (TCP/IPv4) 屬性"。

- 選擇自動取得 IP 位址和自動取得 DNS 伺服器位址旁的單選按鈕。

4.驗證網路瀏覽器輸入的路由器管理位址是否正確。 http://cudy.net/ 或 http ://192.168.10.1 登入Cudy 路由器的Web 介面進行初始設定。請仔細輸入並檢查。

5. 嘗試更換接取終端機或瀏覽器。
- 如果您在手機上無法開啟路由器登入頁面，請嘗試其他終端，例如筆記型電腦、Pad等。
- 您也可以在終端機上嘗試其他網頁瀏覽器。

6. 嘗試使用Cudy APP。
我們的大部分 Cudy 路由器都可以透過 Cudy APP 進行管理。請安裝Cudy APP並嘗試透過APP設定路由器。您可以在Google Play和Apple APP Store下載Cudy APP。請在網站上查看APP的詳細資訊。https://www.cudy.com/cudy_app

7.請檢查並關閉終端機上的WEB代理程式和VPN。然後重試。

8.請嘗試長按重設按鈕約3秒將路由器重設為出廠預設值。當 LED 閃爍時，您可以放開重置按鈕。然後路由器重啟後重試。

返回網誌

66 則留言

@Dear Steve,
Sorry, the router doesn’t support this feature now. We have plan to add this feature in the future. Please wait patiently.
In addition, would you please tell me the reason why do you want to change the backhaul?

“I have 2 wr11000 routers set up in mesh mode running latest software. I would like to manually change the backhaul frequency as it is always defaulting to 6GHz.
How do I change this?”

Support

I have 2 wr11000 routers set up in mesh mode running latest software. I would like to manually change the backhaul frequency as it is always defaulting to 6GHz.
How do I change this?

Steve

@Dear Chris,
Our technical support has contacted you via email. Please check.

“Hi guys. My AX3000 (model M3000) was installed by Cybersmart today. All working and great performance. I reset the router in hopes to rename it but once it came back online – it no longer connects to internet, but does allow devices to connect to it.

ISP is not available at the moment. Have noticed that the default password for logging into the M3000’s UI is not as described in the manual. And the printed SSID is not the same as the current name of the router.

Is this an ISP only problem, or is this something you can assist with?
Best,
CS"

Support

@Dear Tracy,
Our technical support has contacted you via email. Please check.
“I cannot get my router to work. It’s been out almost 24 hours. I cannot find the company I got it from. I work from home and need it ASAP
I have done everything I could from what I found online, nothing worked at all .”

Support

Hi guys. My AX3000 (model M3000) was installed by Cybersmart today. All working and great performance. I reset the router in hopes to rename it but once it came back online – it no longer connects to internet, but does allow devices to connect to it.

ISP is not available at the moment. Have noticed that the default password for logging into the M3000’s UI is not as described in the manual. And the printed SSID is not the same as the current name of the router.

Is this an ISP only problem, or is this something you can assist with?

Best,
CS

Chris Stevens

發表留言