警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
900 則留言
@Dear Tom，
Yes, the firmware of M3000 1.0 and 2.0 are the same.
“Hallo Cudy-Team.
Im about to buy some M3000, though I’m not sure what the difference between v1 and v2 is. Also, on the Google Drive there ist only v1 mentioned for the intermediate firmware or does it work with v2 as well? Thanks in advance, Tom.”
@Dear Nikos,
Do you install the intermediate firmware and OpenWrt firmware both? We don’t offer the support of OpenWrt firmware. You can try to find the instructions on the internet. There are many video instructions. Please have a try.
“I have installed openwrt on AP3000 Outdoor, but Wireless interfaces are missing. I also tried previous versions with the same result. Can you help me?”
@Dear Sascha,
Our technical support has sent you the firmware via email. Please check.
“Hi Cudy Support,
it seems OpenWRT add Support for “Cudy AP1300 Outdoor” (see https://github.com/openwrt/openwrt/pull/16265).
Currently there is no OpenWRT image available but hopefully in the near future.
Can you generate the intermediate firmware for “AP1300 Outdoor” (AC1200) FW:2.2.6 V1 so we are able to install it when OpenWRT is available?
Thank you
Sascha"
@Уважаемый суньхуй вчай,
Наша техническая поддержка отправила вам прошивку по электронной почте. Пожалуйста, проверьте.
“дайте для wr300 переходную прошивку на openwrt”
@Dear Valdas,
We will add it to our develop plan. Thank you for your kindly advice.
“Hello, is here any plans for adding support for bridge mode / ip passthrough on cudy p5?
Thanks.”