警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
900 則留言
@Dear Carlos,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware. Thanks!
“WR11000 support is planned?”
@Dear Stephan,
Thank you for you kindly advice. We will provide feedback to the R&D department for evaluation and push it.
“Could you redistribute current stable 24.10 official builds as signed intermediate?
I’ve seen a request in the official OpenWRT forum where someone seemingly used your intermediate file of a 23.05 build, updated to official 24.10 but forgot to uncheck the “keep settings” checkbox. This left his box stuck because due to some config mismatches. Seems like your build is somehow not 100% compatible with official stock builds in terms of configs.
While I know this is documented in every routers OpenWRT wiki page, the situation could have been avoided if you took the current stable stock file from the OpenWRT downloads server, sign it and put it up on your google drive to download.
I assume the only reason for you to provide a bin file here at all is that the initial switch to OpenWRT requires a cryptographically signed binary. Which you could provide without using a custom build but by just signing an arbitrary stable official build.
To be clear, I’m not asking to provide stock builds for any new device other than those that are already available at your google drive, I’m just asking to switch your custom builds that are signed with stock builds that are signed."
@Dear John L,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware. Thanks!
“Is there any chance for a firmware that removes the checks for the WR11000?”
@Dear Mariano,
Our technical support has sent you the firmware via email. Please check.
““Hi Cudy Support,
it seems OpenWRT add Support for “Cudy AP1300 Outdoor” (see https://github.com/openwrt/openwrt/pull/16265).
Currently there is no OpenWRT image available but hopefully in the near future.
Can you generate the intermediate firmware for “AP1300 Outdoor” (AC1200) FW:2.2.6 V1 so we are able to install it when OpenWRT is available?
Thank you"
Hi, please send me a link for the correct intermediate firmware for a Cudy WR3000_EU v1.0. Thank you