警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
I, just bought a new WR3000 v2 in europe (on amazon). Seems good hardware, but there’s no firmware with signature removal available.
Please support help us (I will ask for a refound on Amazon otherwise !!!)
@Dear Alexei,
Please download the WR3000+V1 without recovery TFTP.zip in the google drive.
“Hello Cudy Support Team,
I have a Cudy WR3000 v1.0 router.
Serial Number 255306528
I would like to install OpenWrt on my router. Could you please provide the Cudy-signed intermediate firmware compatible with my hardware revision?
Thank you.”
“Hello Cudy Support Team,
I have a Cudy WR3000 v1.0 router.
Serial Number 255306528
I would like to install OpenWrt on my router. Could you please provide the Cudy-signed intermediate firmware compatible with my hardware revision?
Thank you.”
@Уважаемый Никита,
Нет, прошивки OpenWRT для WR3600H 1.0 нет. Мы не планируем добавлять поддержку X-Ray.
“добрый день. подскажите когда выйдет для WR3600H 1.0 сделаете нормальную прошивку под openwrt или добавите xray для модели WR3600H 1.0”
@Dear Roman,
TR3000 V1_20251118.zip is the correct one. Please unzip the file before update.
“Hello Cudy Support. I have a Cudy TR3000 V1.0, serial number TR3000255201678 (SN code 2552, so this unit has the new flash chip F50L1G41LC). I would like to install OpenWrt. The Google Drive folder only has the older TR3000 intermediate firmware (“TR3000 V1_20251118.zip”), which per your November 24, 2025 notice is not compatible with the new flash. Could you please send/provide the correct new-flash intermediate (signature-removal) firmware for the TR3000 V1.0? Thank you very much!”
@Dear Ilya,
No, The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Hello, could you provide the OpenWrt firmware for the WR3000 V2.0? There is no intermediate version available on Google Drive.”