警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
@Dear Igor,
Sorry for replying so late due to the Chinese Spring Festival！
Our technical support has sent you the firmware via email. Please check.
“Please send AP3000 intermediate firmware (Realtek PHY, not Motorcomm). Thank you.”
@Dear Jon Fear,
Sorry for replying so late due to the Chinese Spring Festival！I am very busy these days, If you will we can arrange other time to do this. Please contact me first via email or whatsapp if you have.
“So clearly there is an issue here. Sam@Cudy asked for a desktop video of the issue which I have supplied then nothing· It is quite clear others are having serious issues. So my solution is simple. Zyxel NWA50AX PRO are cheap and really work FIRST TIME with an OpenWRT upgrade, so as promised, lots of M3000’s going on e Bay tomorrow…! I have spent too much time on this rubbish with no real support, thank you and goodbye!”
@Уважаемый Иван,
К сожалению, вынужден сообщить, что в настоящее время нет прошивки OpenWrt для WR3000 V2.0.
“Нет прошивки на
Версия прошивки 2.4.15-20251030-114751
Аппаратная версия WR3000 V2.0”
@Dear Jack,
Sorry for replying so late due to the Chinese Spring Festival！
There are two hardware version of WR3000. V1.0 and V2.0. Only the V1.0 can be updated to the OpenWrt firmware. So please check the hardware version first. You can check it on the label at the bottom of the router and the web page of the router. You can find hardware version on the “General Settings” —“Firmware” page.
““Download OpenWrt Firmware to Remove Signature Check”, WR3000, downloaded, applying in interface, getting error “Invalid file, try again””
@Dear Sergey,
Sorry for replying so late due to the Chinese Spring Festival！
Our technical support has sent you the firmware via email. Please check.
“Where is AP3000 intermediate firmware? There are only Outdoor and Wall. Tried toi use Wall one, but it doesn’t work. Could you add a regular AP3000 firmware to Google Drive please?”