警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1530 則留言
Hello.
I have a Cudy WR3000H V1.0.
Serial number: S000160126…
Current stock firmware: 2.4.5-20250515-105059
I want to install official OpenWrt. Please send the compatible Cudy-signed intermediate firmware to the email address provided with this comment.
Thank you.
Hello Cudy Support,
Could you please provide a signed OpenWrt intermediate/transition firmware for the Cudy LT700E V1.0, board ID R55?
My device is currently running the official firmware:
LT700E-R55-1.90.0-20240322-120922
I would like to migrate safely from the stock Cudy firmware to OpenWrt using the normal firmware upgrade procedure.
I noticed that signed intermediate OpenWrt firmware is available for several other Cudy models, including the LT700 Outdoor V1.0 (R43). However, my device is the LT700E V1.0 (R55), so the R43 firmware is not compatible.
Could you please provide the corresponding signed intermediate firmware for LT700E V1.0 / R55, or let me know if there is another officially supported method to install OpenWrt on this model?
Thank you!
@Dear Ignat,
Our technical support has sent you the firmware via email. Please check.
“Hello,
I have a Cudy WR3000 V1.0.
Serial number starts with: 2553
Current stock firmware: 2.4.19-20250828-192837
I want to install official OpenWrt.
Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000 V1.0.
Thank you."
Здравствуйте,
У меня роутер Cudy WR3000U-256MB V1.0.
Серийный номер начинается с: S000130126
Текущая версия прошивки: 2.4.29-20260427-104733
Хочу установить официальную версию OpenWrt.
Пожалуйста, подтвердите, что файл cudy_wr3000u-256-v1-sysupgrade.bin
из папки WR3000U-256MB V1.0 на Google Drive — актуальная и подходящая
промежуточная прошивка для моей модели и ревизии флеш-памяти.
Не в зависимости от этого пришлите мне на почту актуальные данные.
Спасибо.
Hello.
I have a Cudy WR3000H V1.0.
Current stock firmware: 2.4.5-20250515-105059
Flash memory: ESMT F50L1G41LC
WAN PHY: Motorcomm YT8821
I want to install official OpenWrt. Please send the compatible Cudy-signed intermediate firmware to the email address provided with this comment.
Thank you.