警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
Hi Team,
I wanted to download intermediary firmware from https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj for my WR3000 but Microsoft Defender recognized this file as a virus: “AndroidOS/ZkarletFlash” – can you elaborate on that please? Thank you.
@Michael,
Dear,
We have plan to develop the intermediate firmware in near future, please wait. I will send it to you when we done.
“Hi Cudy support, i’m interrested too in runing openwrt on my ap3000 ceiling ap, tested this build and it boot very long over uart, but after it loads it works very well, and now i want to flash it thru web panel, when we get transit firmware? Thanks”
Hi,
I purchased the Cudy WR1300 one week ago. I have faced a lot of problems:
1. Overheating: It becomes too hot easily.
2. Bandwidth limit (QoS): It doesn’t allow me to set a kbps speed limit for clients. Even I can’t set a fractional number like 0.5 Mbps. The lowest value is 1 Mbps.
3. I couldn’t find the LED control feature; I find this disturbing while sleeping.
4. It has a simple app, which doesn’t have any special features like MAC filter or bandwidth control.
5. I have used a Tenda router for a long time. It had all the features and a beautifully easy-to-control interface. I could limit bandwidth from the same interface. I didn’t need to find the QoS or MAC filter option. Also, all the LED control, easy whitelist filtering, everything. Additionally, I used to receive regular updates. The router used to save offline device info as well.
I am using the latest version (v3) of the Cudy WR1300, firmware version 2.26. Now, what should I do?
Hi Cudy support, i’m interrested too in runing openwrt on my ap3000 ceiling ap, tested this build and it boot very long over uart, but after it loads it works very well, and now i want to flash it thru web panel, when we get transit firmware? Thanks
@Konrad,
Dear,
Thank you for contacting Cudy support team.
I will follow this when we back to office.
“Hello Cudy!
I’m also looking forward to openwrt intermidiate for AP3000 v1 indoor. Is there any chance for this?”