OpenWrt 軟體下載

警告

本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。

描述

  1. 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
  2. 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
  3. 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。

保固：

Cudy特此聲明

  1. 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
  2. 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
  3. 如果您需要使用openwrt軟體，建議您從Cudy官網下載。

下載 OpenWrt 韌體以刪除簽名檢查：驅動程式

OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器 

返回網誌

1319 則留言

Hi

Please upload a signed firmware for router Cudy WR3000S

Thanks

Adam

@Jase

Dear Customer,
Thank you for contacting Cudy support team.
The intermediate firmware is under developing. Please wait patiently.

“Hello,
I have purchased 2xWR3000 and 1xWR3000S which I hope to switch them all to openwrt , however no intermediate firmware is listed for the WR3000S

If would be wonderful if this could be made available

Thanks in advance"

Support Cudy

@Mark,
Dear Customer,
Thank you for contacting Cudy support team.
The intermediate firmware is under developing. Please wait patiently.
“Hello,
I bought a Cudy WR3000S and would like to upgrade it with the Openwrt firmware.
I was not able to find the WR3000S+V1.zip file in the Google drive, could you tell me were I can find that file?
Thank you,
Mark”

Support Cudy

@Matt,
Dear Customer,
Thank you for contacting Cudy support team.
The intermediate firmware is under developing. Please wait patiently.

“BTW. WR3000S is supported by OpenWRT already, since 24.10.0-RC2 (and snapshot). Ref: https://firmware-selector.openwrt.org/?version=24.10.0-rc2&target=mediatek%2Ffilogic&id=cudy_wr3000s-v1 .
On a separate note, can you post the .bin sysupgrade files as separate downloads? The antivirus doesn’t like the whole zip files… ;(”

Support Cudy

Hello,

I have purchased 2xWR3000 and 1xWR3000S which I hope to switch them all to openwrt , however no intermediate firmware is listed for the WR3000S

If would be wonderful if this could be made available

Thanks in advance

Jase

發表留言