警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1466 則留言
Hello. I have a WR3000S v.1 router (S/N S0007084261201121). I initially installed the transitional firmware `cudy_wr3000s-v1-sysupgrade_20251119.bin` from your website. Currently, I have `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-squashfs-sysupgrade.bin` installed, with 44 MB of available flash memory. Can I switch to the `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-ubootmod-squashfs-sysupgrade.itb` firmware to get 90+ MB of memory without risking damage to the router?
Thanks in advance.
Hello Cudy Support,
I have a Cudy WR3000H V1.0.
Serial number: S001004261804085 EU1.0
Current stock firmware: 2.4.5-20250515-105059
I would like to install official OpenWrt. Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000H V1.0.
Thank you!
@Dear Gaetano,
Our technical support has sent you the firmware via email. Please check.
“I have a WR3000 EU 1.0 with s/n: WR3000253209334.
Please can i get the Cudy-signed intermediate firmware in email?”
@Dear Leo,
Our technical support has sent you the firmware via email. Please check.
“Hello,
This is my second attempt to reach you. I wrote to support@cudy.com on 22 May 2026 and never received a reply. I have sent another email today, and I am also posting here since I can see you answer requests in these comments.
Model: WR3000 V1.0
Serial number: WR3000255303583
Current stock firmware: 2.4.19-20250828-192837
Please send me by email the correct Cudy-signed OpenWrt intermediate firmware for this exact unit, and please confirm whether it uses the new F50L1G41LC flash chip or the old one.
I am asking because my SN starts with 2553, which by your own explanation means week 53 of 2025 — later than the 2543 cutoff from your notice of 24 November 2025. However, WR3000 1.0 is not listed among the affected models in that notice, so I do not want to guess which image to use.
Thank you very much."
@Dear JW,
Our technical support has sent you the firmware via email. Please check.
“Hello.
I have a Cudy WR3000 V1.0 router.
Serial number starts with: 2452
Firmware: 2.4.5 DE
I would like to install official OpenWrt. I have tried installing the official Cudy “signed” OpenWRT from the google drive link but every time it bricks the router and I have to reflash from TFTP.
Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000 V1.0 and this hardware/flash revision.
Thank you."