警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
A few weeks ago I tried to contact you by email but I haven’t heard back. Can you please send me the firmware image for the AP3000? Is there an explanation on why it is not on the Google Drive?
@Dear Serious,
Please just use the firmware in “WR3000+V1 without recovery TFTP”. It is correct. Since many comnputers detect the TFTP server tool as a virus, and can’t download the file. So I removed it.
“Hello!
Similar to user, Vasilis, I am looking to flash OpenWrt on my Cudy WR3000 router. It is my main and only router at the moment.
In the Cudy Intermediary Firmware Google Drive link, the firmware file is named, “WR3000+V1 without recovery TFTP”. The without recovery part is making me nervous. Is that the only Intermediary Firmware file we have for this router? I see that user Vasilis had issue with that file making his device soft-brick. So I have not tried it yet. If there’s a more appropriate Intermediary Firmware file available for Cudy WR3000 V1 then please send me the file. I will really appreciate it.
I am looking forward to your response.
Regards.”
@Dear TR3000 256MB,
Your router is TR3000 256MB 1.0, not the TR3000 1.0. So you have updated the wrong firmware. Our technical support has sent you the solutions via email. Please check.
“Hello,
Like many happy TR3000 owners I embarked on the journey to flash the new toy with Cudy’s temperary OpenWrt firmware that helps removing signature check down the road. Download and unzip worked well, but Firmware Upgrade failed with error “File is invalid. Please retry.
Uploaded File: cudy_tr3000-v1-sysupgrade.bin
Size: 12.63 MB (13241929 B)
MD5: b8333d8eebd067fcb43bec855ac22364”
Firmware Version 2.3.9-20250208-171917
Hardware TR3000 256MB FLASH V1.0
Thanks"
@Dear VASILIS,
Our technical support has sent you the firmware via email. Please check.
“Hi again, I’ve recovered the router. Now can you send me the correct Firmware to Remove Signature Check for WR3000 to work as an access point?”
Hello!
Similar to user, Vasilis, I am looking to flash OpenWrt on my Cudy WR3000 router. It is my main and only router at the moment.
In the Cudy Intermediary Firmware Google Drive link, the firmware file is named, “WR3000+V1 without recovery TFTP”. The without recovery part is making me nervous. Is that the only Intermediary Firmware file we have for this router? I see that user Vasilis had issue with that file making his device soft-brick. So I have not tried it yet. If there’s a more appropriate Intermediary Firmware file available for Cudy WR3000 V1 then please send me the file. I will really appreciate it.
I am looking forward to your response.
Regards.