警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
900 則留言
I would like to install OpenWRT on my TR3000, but the file that I’m downloading from the link on your page (Google Drive) reports the virus. Could you send me the firmware via email. Highly appreciate.
I am using the us model. I had previously downgraded back to 2.0.0 to try and installing the openwrt firmware but faced the same issue.
“@Dear Shenglong,
The WiFi channel is related to the Country code of the router. You can check the Country code on the System Status page —“System”.
For the firmware update issue, please try to update back to 2.0.0 and try again, You can download the firmware 2.0.0 here on the website.
https://www.cudy.com/pages/download-center/m3000-2-0”
@Dear Shenglong,
The WiFi channel is related to the Country code of the router. You can check the Country code on the System Status page —“System”.
For the firmware update issue, please try to update back to 2.0.0 and try again, You can download the firmware 2.0.0 here on the website.
https://www.cudy.com/pages/download-center/m3000-2-0
“hello, i am unable to use any channels above 64 on 160mhz wifi on my M3000 V1 using the stock cudy firmware.
additionally when trying to flash the openwrt image from cudy i am getting a File is invalid. Please retry. error"
@Dear Tomer,
Please update the firmware 2.0.4 first, then try again. You can download the firmware 2.0.4 here on the website.
https://www.cudy.com/pages/download-center/wr1300-3-0
“Hi please provide the latest version for wr1300 v3 thank you very much!”
@Dear Davide,
Please update the firmware 2.0.4 first, then try again. You can download the firmware 2.0.4 here on the website.
https://www.cudy.com/pages/download-center/wr1300-3-0
“hi, try to install on my wr1300 v3 , everytime signature error , file invalid…. can u send me the correct one?”