警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1536 則留言
@Dear Christian,
Our technical support has contacted you via email. Please check.
“I purchased six WR 3000 E for using them with OpenWRT. When I try to upload the cudy_wr3000e-v1-sysupgrade_20251119.bin from the Google Drive folder I get “Not applicable！Please upload the firmware applicable to the following models.”. The WR 3000 E is running 2.4.7 right now and the S/N is WR3000E24520. What am I doing wrong ? I really would like to run OpenWRT on the Cudys.”
I purchased six WR 3000 E for using them with OpenWRT. When I try to upload the cudy_wr3000e-v1-sysupgrade_20251119.bin from the Google Drive folder I get “Not applicable！Please upload the firmware applicable to the following models.”. The WR 3000 E is running 2.4.7 right now and the S/N is WR3000E24520. What am I doing wrong ? I really would like to run OpenWRT on the Cudys.
@Dear STERGIOS,
Please update to the 2.4.19 first. Then try again.
“I have M3000 version 2 with Serial number code start with M30002521 EU.20 Can’t flash to OpenWrt firmware cudy_m3000-v1-sysupgrade_20251119.bin “File is invalid. Please retry.””
I have M3000 version 2 with Serial number code start with M30002521 EU.20 Can’t flash to OpenWrt firmware cudy_m3000-v1-sysupgrade_20251119.bin “File is invalid. Please retry.”
@Dear Bourn,
OK. I will upload it to the Google Drive.
“Hello Cudy Support,
Thank you very much for your help. I have received the intermediate firmware, then successfully flashed AP1300 Outdoor v1 OpenWrt firmware on my AP1300 v1.0 device. Everything works correctly, and there is no need to build a custom firmware anymore.
Please consider uploading the intermediate firmware you provided to a public location (for example, Google Drive or your download center). This would help many users configure and migrate their devices more easily.
Thank you again for your support."