1.從下載中心下載最新韌體。
2.解壓縮您下載的檔案
3.開啟 Cudy 設備電源，等待 LED 常亮。
4.透過 WiFi 或乙太網路連接到 Cudy 的網路。
5.開啟網頁瀏覽器並造訪http://cudy.net或http://192.168.10.1 .
1.從下載中心下載最新韌體。
2.解壓縮您下載的檔案
3.開啟 Cudy 設備電源，等待 LED 常亮。
4.透過 WiFi 或乙太網路連接到 Cudy 的網路。
5.開啟網頁瀏覽器並造訪http://cudy.net或http://192.168.10.1 .
181 則留言
Dear JAD AL CHIDIAC,
Please send me the error text. In addition, please tell me the current firmware and hardware version. Then tell me the name of the firmware you plan to update. I will check.
“Hello, i am trying to upgrade my router’s firmware and i am uploading the latest extracted .bin file but still it is not letting me update once i click on upload it tells me that the file format is not supported. any clue please”
Hello, i am trying to upgrade my router’s firmware and i am uploading the latest extracted .bin file but still it is not letting me update once i click on upload it tells me that the file format is not supported. any clue please
@Dear Luis,
Our technical support has sent you the firmware via email. Please check.
“Hi, is possible the last firmware for LT400 EU V1.0 version?.
Tnx!”
Hi, is possible the last firmware for LT400 EU V1.0 version?.
Tnx!
@Dear STEVE,
Thank you for you feedback. We will follow it.
“Hi Cudy Team,
This is a follow-up to my previous report on system-wide reboots on the Cudy P5 (R21) at 802.11ax channel widths of 80 MHz and 160 MHz.
After analyzing the syslog I identified two additional root causes:
1. fw_version: 0×250902ab → WLAN.HK.2.5.0.9, built 2021-06-18 — nearly 5 years old
2. board_id: 0xff → P5-specific BDF not loaded, using generic calibration profile
Both issues have been reported to Cudy support. Stable only at 40 MHz channel width until firmware is updated.""