1.從 這裡。
2.從 官方網站並將其重新命名為"recovery.bin"。
3.關閉路由器電源。拔掉電源供應器或按電源按鈕。
4.使用乙太網路線將電腦連接到路由器的 LAN 連接埠。
5.手動將電腦的 IP 位址配置為"192.168.1.88"。 6.執行"tftp32.exe"。
7.在命令列中執行"netsh advfirewall set allprofiles state off"來停用Windows防火牆，否則tftp將被阻止。
8.按下"重設"按鈕/孔並按住。在路由器開機和 tftp 開始下載韌體之前，請勿放開"重設"按鈕/孔。 9.開啟路由器電源。 10。當指示燈全部快速閃爍時，或 tftp 開始下載韌體時，您可以放開"重設"按鈕/孔。
11.當燈慢閃時，升級完成。
12.請將您電腦的IP位址還原為動態IP。 13.完成。
223 則留言
Я пытался установить заводскую прошивку потратил на это 7 часов. Делал все по инструкции попробовал все порты на роутере, но файл recovery не устанавливается err. Теперь я знаю какие роутеры покупать сам и советовать другим людям я нигода не буду!
Greetings Cudy staff,
I am trying to restore an AX3000. I understand that “AX3000” is more of a branding name and that the actual model is TR3000. I have tried firmware versions from 1.16.4 up to 2.4.22. Then I checked the Chinese downloads page and realized there are 128 MB and 256 MB flash versions. I have tried several of them, always with the same result: judging from the LED behavior, the router successfully downloads the recovery.bin file and tries to boot it, but then it either keeps blinking red and white, or blinks for a while and ends up solid red.
So I have some questions and suggestions:
1- Please add instructions and tools for macOS and Linux (at least Debian). I understand that the majority of users are on Windows, but more and more people are switching. I spent quite a long time just figuring out how to set up the TFTP server on macOS.
2- It would be very helpful if this document included a clear LED behavior chart. What each blinking pattern means is not obvious right now.
3- I am not sure which file I should actually use. Which firmware version should I try for my unit, and how can I know whether my router is the 128 MB or the 256 MB flash version?
инструкция не рабочая,для wr300 не подходить. Нажмите и удерживайте на роутере кнопку сброса настроек (Reset). Удерживайте кнопку сброса настроек (Reset),после этого роутер горит диодом и не получат ip-адресс!!!!
@Dear Vic,
我已经给你回复邮件，请查收。
“是接WAN口，LAN口无反应”
是接WAN口，LAN口无反应