1.從 這裡。
2.從 官方網站並將其重新命名為"recovery.bin"。 跨度>跨度>
3.關閉路由器電源。拔掉電源供應器或按電源按鈕。
4.使用乙太網路線將電腦連接到路由器的 LAN 連接埠。
5.手動將電腦的 IP 位址配置為"192.168.1.88"。 跨度>跨度> 6.執行"tftp32.exe"。
7.在命令列中執行"netsh advfirewall set allprofiles state off"來停用Windows防火牆,否則tftp將被阻止。
8.按下"重設"按鈕/孔並按住。在路由器開機和 tftp 開始下載韌體之前,請勿放開"重設"按鈕/孔。 跨度>跨度> 9.開啟路由器電源。 跨度>跨度> 10。當指示燈全部快速閃爍時,或 tftp 開始下載韌體時,您可以放開"重設"按鈕/孔。
11.當燈慢閃時,升級完成。
12.請將您電腦的IP位址還原為動態IP。 跨度>跨度> 13.完成。
55 則留言
@Dear Gleb,
Please describe the process in detail, I will check and try to find the solution.
In addition, what is the LED status when powering on the router, please record a video to show me.
“Hi, please help me. I followed all the steps and couldn’t recover my Cudy wr1300 v3. No firmware download process with tftpd 32 and 64, I tried lan and van ports.”
@Henry Corredor
Dear Customer,
Thank you for contacting Cudy support team.
Yes, the steps are the same. But you need to run a tftp server on the Linux or macOS system. You can google how to run tftp server on the Linux or macOS system.
“Hi everyone! Is a little troublesome for me to use Windows system. I would like to know if there is a way to make it with Linux or macOS system.”
Hi, please help me. I followed all the steps and couldn’t recover my Cudy wr1300 v3. No firmware download process with tftpd 32 and 64, I tried lan and van ports.
Hi everyone! Is a little troublesome for me to use Windows system. I would like to know if there is a way to make it with Linux or macOS system.
@zyth
你好
请问你需要什么文件?
“文件没有了”