路由器的 Wi-Fi 名稱 (SSID)、Wi-Fi 密碼和安全選項均已預先設定。預設 SSID 和密碼可在裝置標籤上找到。您可以根據需要修改無線設定。
第2 步：前往常規設定->無線頁。
智慧型連線：
第1步驟： 開啟網路瀏覽器並前往http://cudy.net 或 http://192.168.10.1。 使用"admin"作為密碼登入。 -router" data-mce-fragment="1" data-mce-href="https://www.cudy.com/newsinfo/2794702.html">如何登入Web介面Cudy 路由器？
啟用智慧連線後，路由器的 2.4GHz 和 5GHz 網路共用相同的 SSID（網路名稱）和密碼。
無線 2.4G 或 5G：
應啟用 2.4GHz 或 5GHz 無線網路。如果您不想使用無線功能，只需取消勾選該方塊即可。如果停用無線功能，所有無線設定將無法運作。
無線 SSID 和密碼：
輸入您要變更的新 Wi-Fi 名稱和 Wi-Fi 密碼。 ="color: #ff2a00;">注意：如果您使用無線設備更改無線設置，您將斷開連接。
加密：
無加密、WPA-PSK、WPA2-PSK、WPA-PSK/WPA2-PSK（建議）、WPA2-PSK/WPA3-SAE 、WPA3-SAE。
模式：
2.4GHz：802.11b、802.11b+g、802.11b+g+n、802.11b+g+n+ax
5GHz：802.11a、802.11a+n、802.11a+n+ac、802.11a+n+ac+ax
注意：如果您發現某些用戶端在連接5GHz 的Wi-Fi 6 路由器時出現問題，請更新用戶端的無線網卡驅動程式更新至最新版本。如果仍有問題，請將路由器的無線模式調整為5GHz（802.11a+n+ac）。
頻道：
預設為"自動"。從下拉清單中選擇您要使用的頻道。此欄位決定將使用哪個工作頻率。除非您發現幹擾問題，否則無需更改無線頻道。
通道寬度：
預設為"自動"。如有必要，請從下拉清單中選擇通道寬度。
發射功率：
最大、中或最小
預設為"最大"，如果更改為其他，則 Wi-Fi 訊號將會減少。
注意：除非必要，我們不建議您更改預設值。
隱藏網路
如果您啟用隱藏 SSID，您的 SSID 將不會廣播。當您搜尋本機無線網路時，您的 SSID 不會顯示在無線裝置的 Wi-Fi 清單中，因此您必須手動加入網路。
60 則留言
@Dear Michael,
You can change the channel of the router when the router is working on "Wireless Router " and "Wireless Access Point " mode. Then, you can go to “General Settings” — “Wireless” page. Click “Advanced” and change the 2.4GHz and 5GHz channel.
“Hi,
How to change WiFi channel?
Hardware WR3000E
Could it be that in the software version 2.4.7 the menu has changed an no possibility to alter the channel?
By the way, in the app are some devices with wrong vendor. My Apple TV is displayed as “Cudy router”"
Hi,
How to change WiFi channel?
Hardware WR3000E
Could it be that in the software version 2.4.7 the menu has changed an no possibility to alter the channel?
By the way, in the app are some devices with wrong vendor. My Apple TV is displayed as “Cudy router”
@Dear Victor,
Yes, it is normal. Sole means that the device doesn’t install mesh system.
“Thanks for the answer! 2 additions – when the Mesh switch is off, you really can’t add more clients, everything is as you said, it turns out everything is disabled, but if we are going to – System Status / Mesh, why the Mesh Status – Online, even when the in management it turned off, and on a diagram it turned off too. Is this normal, is it supposed to be like this? And what does SOLE mean anyway?”
Thanks for the answer! 2 additions – when the Mesh switch is off, you really can’t add more clients, everything is as you said, it turns out everything is disabled, but if we are going to – System Status / Mesh, why the Mesh Status – Online, even when the in management it turned off, and on a diagram it turned off too. Is this normal, is it supposed to be like this? And what does SOLE mean anyway?
@Dear Victor,
Yes, this is normal. The mesh function is disabled. You can check it on the diagram at the top of the page. The router can’t add mesh device any more.
“Hello!
Cudy WR3000E, In the router control panel, the mesh connection status is SOLE, there is a Mesh parameter with ON-OFF positions, when disabling it, its status is still displayed as SOLE – is this normal? I can’t figure out if it is disabled or not. On the previous router, when disconnected, it was displayed as completely disabled. And on connected devices, the mesh icons are still displayed, is it possible to somehow completely disable the function if I don’t need it? I also noticed that a hidden ssid appeared, judging by the forums, it is associated with this."