Port Forwards（連接埠轉送）功能允許互聯網上的遠端電腦連接到專用 LAN 內的特定電腦或服務。配置前的服務埠號碼。 data-mce-style="color: #ff2a00;">重要提示：
確保Cudy 路由器從您的網際網路服務供應商取得公共IP (WAN IP ) ，如果它是私有IP位址，則表示Cudy前面還有另一個NAT裝置。您還需要開啟該裝置上的服務連接埠。
如何驗證IP位址是公網還是私網，請參考此連結：
http://en .wikipedia.org/ wiki/Private_network
如何查看Cudy的WAN IP？
無線路由器與無線路由器Mesh（系統狀態->WAN->狀態） 4/5路由器（系統狀態->蜂窩/4G->狀態） 注意： 1.通常，如果公用IP和IP位址相同，則表示您擁有公用IP。 IP 位址是您從網際網路服務供應商取得的 WAN IP 位址。上面的公共 IP 是其他裝置可以透過網路找到您的 IP 位址。因此，如果 Cudy 路由器獲得私人 IP 位址，您需要找出哪個裝置使用此公用 IP 並開啟其上的連接埠。
2.對於大多數蜂窩路由器，網路服務供應商通常會提供私人 IP 位址。因此，如果您想進行連接埠轉發，請聯絡您的網際網路服務供應商為您指派一個公用IP位址或由他們進行連接埠轉送。
第1 步：開啟網頁瀏覽器並前往http://cudy.net或http://192.168.10.1。 第2步：點選進階設定-> 網路部分中的連接埠轉送。
第 3 步：點選新增將一個項目新增到清單中。在下面的欄位中輸入您想要的參數。
例如：根據以下配置，主機 192.168.10.18 的 TCP 連接埠 5000、UDP 連接埠 5001 以及 TCP/UDP 連接埠 6000 將向 Internet 開放。
名稱： 
條目的名稱，用於方便記憶
協議：
TCP、UDP或TCP+UDP
< strong >外部連接埠
WAN側可透過Internet存取的服務連接埠
內部IP位址：
主機的IP位址，即將開放到網際網路的連接埠< br>內部連接埠：
區域網路中主機的服務連接埠
注意：
一般情況下，內部連接埠與外部連接埠相同。 > >儲存並保存套用'儲存設定。現在您可以嘗試使用http://WAN IP:連接埠號碼來存取您已開啟的服務。
37 則留言
博主，你好！
最近使用tr3000路由器使用ipv6时测试端口转发，发现无法映射到内网ipv4地址，请问有解决办法吗？
@Dear Yuri,
Our technical support has contacted you via email. Please check.
“I eagerly awaited a response from someone who could help me with the problem I described… I followed your instructions and set up the ZeroTier network. But it doesn’t solve my problem!
The host I want to connect to via RDP does not have the ZeroTier network client – Windows 8.1. I installed different versions from 1.6.6 to 1.8.8, but the network on the host did not start (the firewall is disabled).
Perhaps to connect from my host (with ZeroTier), I only need one rule in the routing on the cudy 3600 router located in ZeroTier, and/or to create a bridge?”
I eagerly awaited a response from someone who could help me with the problem I described… I followed your instructions and set up the ZeroTier network. But it doesn’t solve my problem!
The host I want to connect to via RDP does not have the ZeroTier network client – Windows 8.1. I installed different versions from 1.6.6 to 1.8.8, but the network on the host did not start (the firewall is disabled).
Perhaps to connect from my host (with ZeroTier), I only need one rule in the routing on the cudy 3600 router located in ZeroTier, and/or to create a bridge?
@Dear Yuri,
You can add Routing rules on the Zerotier Management console page to meet you requirement. Please refer to this article on the website.
http://cudy.com/blogs/faq/how-to-remote-connect-cudy-router-via-zerotier?pos=1&_sid=33968118a&ss=r
“There is a Zerotier network with one host and one router. Physically, they are located in different networks with different providers behind grey IPs. How can I redirect an RDP connection on the router to another host that does not have Zerotier and is located in the same local network as the router?”
There is a Zerotier network with one host and one router. Physically, they are located in different networks with different providers behind grey IPs. How can I redirect an RDP connection on the router to another host that does not have Zerotier and is located in the same local network as the router?