常見網路拓樸：
< span data-mce-fragment="1">
第1 步： 將範圍擴展器插入牆壁插座，然後等待電源指示燈穩定亮起。
注意： 1. 設定範圍擴展器時，請將其靠近您的主機路由器。
2.將重設範圍擴展器至預設值以避免出現介面。 >
第2 步：連接到範圍擴展器的預設Wi-Fi -Fi 是開放的 Wi-Fi。
第3 步：啟動網頁瀏覽器，然後輸入http://cudyre.net/ 或http://192.168.10.254/ 在網址列。 將會跳出下面的登入頁面。選擇網頁管理頁面的顯示語言，要求的密碼為"admin"或需要建立一個密碼。
第4 步：將彈出"快速設定"窗口，選擇"無線擴展器"，然後前往"下一步" >.
< /p>
第5 步： 選擇您的"時區"。
< /p>
第6 步： 選擇您想要的主機網路延長。 點選"連接"。
< img src="https://cdn.shopify.com/s/files/1/0673/4748/0820/files/EX8_480x480.png?v=1712026446" style="float: none;" data-mce-fragment="1" data-mce-src="https://cdn.shopify.com/s/files/1/0673/4748/0820/files/EX8_480x480.png?v=1712026446"> < /p>
第7 步：輸入主機路由器的無線密碼。
< /p>
注意：確保您輸入的無線密碼正確，否則配置無法成功。
第8 步：自訂WiFi 名稱(SSID )且密碼與您的主機網路相同。
第9 步： 點選"保存並保存 應用"完成配置。
< /p>
第10 步：將您的無線設備重新連接到新設備Wi-Fi 網路。
注意：
- 選擇項目後，整個頁面將重新整理。
- 在新視窗中開啟。
18 則留言
@Dear Greg,
Our technical support has sent you the solutions via email. Please check.
“My RE3000 worked well for almost two years. Then problem started. Not passing internet connection. WIFI signal stays ok, byt no internet. Power off/on was helping for some time. The process keep getting worse. Initially once a month, than once or twice a week.
Updates are automatic, the newest version is loaded.
When I reset everthing to factory settings and started from the beginning as stated here on the help pages, all looked ok.
The wifi , ssid, all works. works but no internet.
On the status page all stays green, looks great. However without forwarding any internet.
What else can I do?”
My RE3000 worked well for almost two years. Then problem started. Not passing internet connection. WIFI signal stays ok, byt no internet. Power off/on was helping for some time. The process keep getting worse. Initially once a month, than once or twice a week.
Updates are automatic, the newest version is loaded.
When I reset everthing to factory settings and started from the beginning as stated here on the help pages, all looked ok.
The wifi , ssid, all works. works but no internet.
On the status page all stays green, looks great. However without forwarding any internet.
What else can I do?
Bardzo dziękuję
I have AC1200 Cudy Extenders (3 pack) The master Extender is working but the other two which are positioned away from the Master and the Fritz Box Router have stopped working.
I have reset them to factory settings many times and tried to re pair them with the master by pressing the button on the back of the extender for 1 second and then pressing the button on the back of the Master Cudy for 1 second. The lights are flashing on both but the light on the Master returns to solid white/blue after about 2 minutes while the light on the extender changes to Solid Red, I also purchased a new extender but the same thing happens when I try to pair, therefore I don’t think the original 2 extenders are damaged but why will they not pair with the master.
i can not follow how to do this online, is there someone who can help me through the steps required?? Thank you.
@Dear Rue,
1. Please try to reset the Extender to factory default by long pressing the reset button for about 3 seconds. You can release the reset button when the LED flashes. Then reinstall the Extender and check if the problem remains？
2. You can try to update the latest firmware of your Extender and check again. You can download the firmware on the link.
https://www.cudy.com/en-us/pages/download-center/search
“My exteneder just flash light and then turns off and dose not show the word mange router as usual and when i link it to the router the lock light is the only bright light”