常見網路拓樸：
< span data-mce-fragment="1">
第1 步： 將範圍擴展器插入牆壁插座，然後等待電源指示燈穩定亮起。
注意： 1. 設定範圍擴展器時，請將其靠近您的主機路由器。
2.將重設範圍擴展器至預設值以避免出現介面。 >
第2 步：連接到範圍擴展器的預設Wi-Fi -Fi 是開放的 Wi-Fi。
第3 步：啟動網頁瀏覽器，然後輸入http://cudyre.net/ 或http://192.168.10.254/ 在網址列。 將會跳出下面的登入頁面。選擇網頁管理頁面的顯示語言，要求的密碼為"admin"或需要建立一個密碼。
第4 步：將彈出"快速設定"窗口，選擇"無線擴展器"，然後前往"下一步" >.
< /p>
第5 步： 選擇您的"時區"。
< /p>
第6 步： 選擇您想要的主機網路延長。 點選"連接"。
< img src="https://cdn.shopify.com/s/files/1/0673/4748/0820/files/EX8_480x480.png?v=1712026446" style="float: none;" data-mce-fragment="1" data-mce-src="https://cdn.shopify.com/s/files/1/0673/4748/0820/files/EX8_480x480.png?v=1712026446"> < /p>
第7 步：輸入主機路由器的無線密碼。
< /p>
注意：確保您輸入的無線密碼正確，否則配置無法成功。
第8 步：自訂WiFi 名稱(SSID )且密碼與您的主機網路相同。
第9 步： 點選"保存並保存 應用"完成配置。
< /p>
第10 步：將您的無線設備重新連接到新設備Wi-Fi 網路。
注意：
- 選擇項目後，整個頁面將重新整理。
- 在新視窗中開啟。
13 則留言
My exteneder just flash light and then turns off and dose not show the word mange router as usual and when i link it to the router the lock light is the only bright light
@Dear George,
Please try to enable the “MAC Repeater” function on the “Advanced Settings” page. Then check if the problem remains?
If yes, you can also try to set it to WISP mode.
“Hello, I have the AP1300 outdoors and I am using it as an extender. Although I set it up successfully and I can connect with very good speeds after a few hours all my devices are disconnected and cannot obtain IP. My router IP is 192.168.2.1. My provider tried to make some settings, even try a static ip with with range but again after a few hours all devices are disconnected. Is the repeater IP the same as my router’s? In the cudy app it notes that my IP is 192.168.10.254. My service provider says that this might be the problem. Please help me to solve this, when the devices works it really works great. Thank you in advance, George”
Hello, I have the AP1300 outdoors and I am using it as an extender. Although I set it up successfully and I can connect with very good speeds after a few hours all my devices are disconnected and cannot obtain IP. My router IP is 192.168.2.1. My provider tried to make some settings, even try a static ip with with range but again after a few hours all devices are disconnected. Is the repeater IP the same as my router’s? In the cudy app it notes that my IP is 192.168.10.254. My service provider says that this might be the problem. Please help me to solve this, when the devices works it really works great. Thank you in advance, George
@Claudia,
You can try to reset the device to factory default and set it up again. If the device is faulty, such as the LED will not power on. I suggest you to contact the seller to request a warranty.
“Hi
My extender just stopped working”
Hi
My extender just stopped working