Cudy Whole Home Mesh 系統旨在消除死區並在整個家庭中提供不間斷的 Wi-Fi。本文將引導您逐步建立一個Mesh Wi-Fi 系統。
準備工作：
1.確保您至少擁有 2 個 Cudy 產品。 Cudy所有產品均支援Mesh技術：首頁Mesh-Cudy官網
3.韌體是最新的：下載中心
4.配置時將它們放在同一個房間。將所有 Cudy 產品重設為出廠預設值。 （開機狀態下，用大頭針按住RESET按鈕6秒，然後放開。）
6.設定主路由器並使其連接到網際網路。
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
詳情請參考如何登入Cudy Router的Web介面？
第2步：在系統狀態頁面，點選"+"按鈕。
步驟 3：按 M1800 上的 WPS 按鈕，然後按下 WR2100 上的 WPS 按鈕。
主網格單元：白色閃爍
附加網格單元：白色和紅色交替閃爍
第4步：它將轉到"正在掃描"，然後"正在連接"。
第 5 步：等待附加路由器的系統 LED 變成藍色常亮，然後重新定位 WR2100。
第 6 步：成功並享受網狀網路。
註：
1. 4/5G 路由器只能設定為主網單元。例如：
2.您將無法登入附加網狀路由器的 Web 介面。如果您想要變更設置，請點選"系統狀態"->"網格"。
90 則留言
Thank you. How do I set the AX3000 , as wireless router , wireless acsess point ,wireless extender or WISP ?
@Dear Marc Pappin,
Yes, you can install mesh system with AP3000 and M3000. Please follow the steps:
1.Keep the three M3000 in the factory default status. Power them on next to the AP3000.
2. login to the webpage of AP3000, Click + to search the mesh nodes and then add all the three M3000 to be the satellite mesh nodes.
3. After mesh installed. You can move the three M3000 to the placement you want to place it.
“Hi, could I create a network, in the following sequence : AP3000, connected via a eth.cable to a non-cudy router . Router is connected via cable to WAN
After this proves to be stable I want to extend and create a mesh with 3 M3000 , all wireless.
Can the M3000 come off the AP3000, and if so how to set up and pair?
Thanks for your help"
@Dear Marc Pappin,
Yes, you can install mesh system with AP3000 and M3000. Please follow the steps:
1.Keep the three M3000 in the factory default status. Power them on next to the AP3000.
2. login to the webpage of AP3000, Click + to search the mesh nodes and then add all the three M3000 to be the satellite mesh nodes.
3. After mesh installed. You can move the three M3000 to the placement you want to place it.
“Hi, could I create a network, in the following sequence : AP3000, connected via a eth.cable to a non-cudy router . Router is connected via cable to WAN
After this proves to be stable I want to extend and create a mesh with 3 M3000 , all wireless.
Can the M3000 come off the AP3000, and if so how to set up and pair?
Thanks for your help"
Hi, could I create a network, in the following sequence : AP3000, connected via a eth.cable to a non-cudy router . Router is connected via cable to WAN
After this proves to be stable I want to extend and create a mesh with 3 M3000 , all wireless.
Can the M3000 come off the AP3000, and if so how to set up and pair?
Thanks for your help
@Dear Andy,
Yes, support. You can install mesh system with them.
“Are m3000 (ax3000) mesh unit compatible with later (BE11000 for example) mesh routers?”
Are m3000 (ax3000) mesh unit compatible with later (BE11000 for example) mesh routers?