Cudy Whole Home Mesh 系統旨在消除死區並在整個家庭中提供不間斷的 Wi-Fi。本文將引導您逐步建立一個Mesh Wi-Fi 系統。
準備工作：
1.確保您至少擁有 2 個 Cudy 產品。 Cudy所有產品均支援Mesh技術：首頁Mesh-Cudy官網
3.韌體是最新的：下載中心
4.配置時將它們放在同一個房間。將所有 Cudy 產品重設為出廠預設值。 （開機狀態下，用大頭針按住RESET按鈕6秒，然後放開。）
6.設定主路由器並使其連接到網際網路。
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
詳情請參考如何登入Cudy Router的Web介面？
第2步：在系統狀態頁面，點選"+"按鈕。
步驟 3：按 M1800 上的 WPS 按鈕，然後按下 WR2100 上的 WPS 按鈕。
主網格單元：白色閃爍
附加網格單元：白色和紅色交替閃爍
第4步：它將轉到"正在掃描"，然後"正在連接"。
第 5 步：等待附加路由器的系統 LED 變成藍色常亮，然後重新定位 WR2100。
第 6 步：成功並享受網狀網路。
註：
1. 4/5G 路由器只能設定為主網單元。例如：
2.您將無法登入附加網狀路由器的 Web 介面。如果您想要變更設置，請點選"系統狀態"->"網格"。
4 則留言
@Julos
Dear Customer，
Thank you for contacting Cudy support team.
Yes, you can. Please reset the WR1300 to factory default. Then connect the WAN port of the WR1300 to the LAN port of the LT12 via cable. The mesh system will installed automatically.
“Can I connect the LT12 and WR1300 in mesh using the ethernet wired connection?
Thanks"
Can I connect the LT12 and WR1300 in mesh using the ethernet wired connection?
Thanks
@Xavier，
Dear Customer,
We have developed new firmware of WR1500 like other Cudy routers. It will be very easy to install Cudy mesh as the instruction on this article. I have sent you the firmware and instruction via email. Please refer to the instruction attached to update the firmware then reinstall the router and install mesh with them.
“I have 2 wr1500 routers running with the last firmware, both have de easymesh option, I want to connect them in a mesh network, but the interface is so diferent that the showed here, please help me to connect them properly to have a mesh network. Thanks”
I have 2 wr1500 routers running with the last firmware, both have de easymesh option, I want to connect them in a mesh network, but the interface is so diferent that the showed here, please help me to connect them properly to have a mesh network. Thanks