有時您可能無法存取路由器的內建管理頁面 cudy.net。此故障可能會導致出現錯誤頁面，甚至根本沒有回應，即白屏。
1. 檢查路由器是否已上電並正常啟動。
您可以使用包裝中隨附的電源轉接器。如果您沒有使用此電源轉接器，請使用與路由器標籤上標註電壓相同的電源轉接器。電流必須至少為標籤上標註的額定電流。
上電後，等待約1分鐘設備啟動。此時，您可以使用手機或其他終端機嘗試搜尋路由器標籤上標示的SSID。
3.檢查終端的 TCP/IP 設定。 Windows 範例：
如果您已使用自訂 IP 位址和 DNS 設定配置了 PC 的無線網路介面卡。您應該切換回自動取得它們。然後，輸入ncpa.cpl 並選擇"確定"。 1">-在"網路"標籤下，雙擊"Internet 協定版本 4 (TCP/IPv4) 屬性"。
- 選擇自動取得 IP 位址和自動取得 DNS 伺服器位址旁的單選按鈕。
4.驗證網路瀏覽器輸入的路由器管理位址是否正確。 http://cudy.net/ 或 http ://192.168.10.1 登入Cudy 路由器的Web 介面進行初始設定。請仔細輸入並檢查。
5. 嘗試更換接取終端機或瀏覽器。
- 如果您在手機上無法開啟路由器登入頁面，請嘗試其他終端，例如筆記型電腦、Pad等。
- 您也可以在終端機上嘗試其他網頁瀏覽器。
6. 嘗試使用Cudy APP。
我們的大部分 Cudy 路由器都可以透過 Cudy APP 進行管理。請安裝Cudy APP並嘗試透過APP設定路由器。您可以在Google Play和Apple APP Store下載Cudy APP。請在網站上查看APP的詳細資訊。https://www.cudy.com/cudy_app
7.請檢查並關閉終端機上的WEB代理程式和VPN。然後重試。
8.請嘗試長按重設按鈕約3秒將路由器重設為出廠預設值。當 LED 閃爍時，您可以放開重置按鈕。然後路由器重啟後重試。
100 則留言
Model:WR3000E V.1.0 На задней стенке роутера указан password:67220793,но войти в настройки роутера я не могу! Что делать? Как войти в настройки роутера если пароль не работает?
@Dear Roman，
What is the model of your router? You can check the model on the label at the bottom of the router.
“After initial start and update of the firmware, i cannot access webpage http://cudy.net/ or http://192.168.10.1, also router has only 1 blue light on – power. It does not respond to RESET button, i’ve been holding it for a minute and LED haven’t blinked once.”
After initial start and update of the firmware, i cannot access webpage http://cudy.net/ or http://192.168.10.1, also router has only 1 blue light on – power. It does not respond to RESET button, i’ve been holding it for a minute and LED haven’t blinked once.
@SUPPORT
I’ve tried a few different power sources (including quick charger of my phone) as well as different USB cables – no joy. The router came without a power adapter – it’s the orange TR1200 – the travel one.
@Dear Daniel,
The router can not be powered up according to your description. Please try to change a charger (such as the charger of your phone) to power on the router and check if if the problem is related to the router or just the power supply adaper?
If the problem is related to the router. Please contact the seller to request a replacement. If the problem is related to the power supply adaper. Please also contact the seller to request a warranty. But you can use it first. Then you can buy a new power adapter and request a part refund.
“Hi,
I bought a brand new TR1200. after connecting to power source I wasn’t able to find it in available wi-fi connections neither on my laptop nor a smartphone (I also installed the app). I tried disconnecting and re-connecting power. nothing changed. I tried holding the reset button – the red LED at the front never blinked. It does light up and stays solid red all the time. next I connected the router using network cable to my laptop. I can’t access the web interface neither typing the cudy.net nor the IP address. I followed all the steps from the tutorial basically and no success. the ethernet connection on the laptop shows as ‘unidentified’. when I ran diagnose of the ethernet connection it shows “Ethernet” doesn’t have a valid IP configuration. – and I did follow all the steps including No. 3. Is there anything else I could do or should I return the router?”