警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
@Dear Zjamnik,
Our technical support has sent you the firmware via email. Please check.
“I can’t download x6 v1 firmware from the Drive link, any file with “pr” as the owner fails with error. Is there another mirror for the”
Hello Cudy Team,
I have a Cudy WR3000S v1 router with a serial number starting with 2551, which means it uses the new Flash chip F50L1G41LC.
I found the WR3000S v1 folder on your Google Drive, however the file inside was last updated on November 19, 2025 — which is before your notice about the new Flash support (November 24, 2025). So this appears to be the old intermediate firmware, which is not compatible with my device and could brick it.
Could you please send me the correct updated intermediate firmware for WR3000S v1 (compatible with the new Flash F50L1G41LC) directly to my email (semsumerian@gmail.com)?
Thank you in advance for your help.
I can’t download x6 v1 firmware from the Drive link, any file with “pr” as the owner fails with error. Is there another mirror for them?
@Dear Francesco,
I am not sure about it. The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Sorry the Firmware OPENWRT for Cudy P2 V1.0 will it come out?”
@Привет, Игорь,
Наша техническая поддержка отправила вам прошивку по электронной почте. Пожалуйста, проверьте.
“Добрый день, вышлите мне intermediate firmware для cudy ap3000 v1.0.”