警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1530 則留言
Hi,
I have two m3000 with Motorcomm YT8821 and would like to have the firmware, because I cannot download it from Google Drive.
Thank you in advance.
Hello,
I have a Cudy WR3000 V1.0.
Serial number : WR3000245106420 EU1.0
Current stock firmware: 2.2.6-20240902-033948
I want to install official OpenWrt.
Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000 V1.0.
Thank you in advance.
@Dear Odissey,
Our technical support has contacted you via email. Please check.
“Hello,
I have a Cudy WR3000 V1.0.
Serial number starts with: 2549
Current stock firmware: 2.4.19-20250828-192837
I want to install official OpenWrt.
Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000 V1.0.
Thank you."
@Dear Sasa,
Our technical support has sent you the firmware via email. Please check.
“Hi all,
I have a Cudy AX 3000 (Model M3000 V2).
Current Stock Firmware 2.5.28-20260807-120317
PLEASE, send me the newest updated Cudy-signed OpenWrt intermediate firmware.
Thanks
Sasa”
@Dear Igor,
1. You router model is WR3000U. So you can’t use the firmware for WR3000.
2. I can find the project of WR3000U on openwrt.org. But for now, it is only snapshot version. I am not sure when will the fial official will be released. You can try to find the proper firmware on your local forum or contact our local support.
“Hello,
I have a Cudy WR3000U-256MB V1.0 router.
SN: S000130126220 EAEU1.0
Current firmware: 2.4.29-20260427-104733
I tried installing official OpenWrt following the standard process:
1. Installed the intermediate firmware cudy_wr3000u-256-v1-sysupgrade.bin from your Google Drive folder — successful.
2. Attempted to flash the official OpenWrt 25.12.5 image for “Cudy WR3000 v1” (device profile cudy,wr3000-v1) from firmware-selector.openwrt.org.
I received this error:
“Device cudy,wr3000u-v1 not supported by this image. Supported devices: cudy,wr3000-v1”
It appears the intermediate firmware identifies my device under a separate profile “cudy,wr3000u-v1” (with a U), while the official OpenWrt image is built for a different profile “cudy,wr3000-v1” (without the U).
Questions:
1. Does my unit’s batch use a different flash memory chip requiring a separate device profile?
2. Is there already a compatible OpenWrt image for the cudy,wr3000u-v1 profile, and where can I download it?
3. If not yet available, when is it expected to be released?
I did not force the flash and safely restored the router to stock firmware via TFTP recovery to avoid damaging the device. The router is currently fully functional on stock firmware.
Thank you for your help."