如何升級Cudy路由器的韌體?

1.從下載中心下載最新韌體。


2.解壓縮您下載的檔案


3.開啟 Cudy 設備電源,等待 LED 常亮。


4.透過 WiFi 或乙太網路連接到 Cudy 的網路。


5.開啟網頁瀏覽器並造訪http://cudy.nethttp://192.168.10.1 .

有關詳細信息,請參閱如何登入Cudy Router的Web介面?


6.升級韌體。

a。 進階設定 ->韌體,選擇您解壓縮後上傳的韌體。

 

b。 常規設定->韌體頁面可以進行線上升級和本地更新。

注意:僅韌體 2.x.x 或更高版本支援。


7.等待5分鐘路由器重啟。

返回網誌

181 則留言

@Estimado Snheider:
Intente cambiar el navegador web para actualizar el router. Le sugiero que utilice Chrome o Edge.
Si sigue sin funcionar, pruebe con otro ordenador.

“Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba”

Support

Firmware EU 1.0 (Official .bin)

Ahmed1998

Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba

Snheider

@Dear Sakis,
Please try to change the web browser to update the router. I suggest the chrome or edge.
If still fail, please try to change a computer.

“It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10”

Support

It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10

Sakis

發表留言