Cudy Whole Home Mesh 系統旨在消除死區並在整個家庭中提供不間斷的 Wi-Fi。本文將引導您逐步建立一個Mesh Wi-Fi 系統。
準備工作：
1.確保您至少擁有 2 個 Cudy 產品。 Cudy所有產品均支援Mesh技術：首頁Mesh-Cudy官網
3.韌體是最新的：下載中心
4.配置時將它們放在同一個房間。將所有 Cudy 產品重設為出廠預設值。 （開機狀態下，用大頭針按住RESET按鈕6秒，然後放開。）
6.設定主路由器並使其連接到網際網路。
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
詳情請參考如何登入Cudy Router的Web介面？
第2步：在系統狀態頁面，點選"+"按鈕。
步驟 3：按 M1800 上的 WPS 按鈕，然後按下 WR2100 上的 WPS 按鈕。
主網格單元：白色閃爍
附加網格單元：白色和紅色交替閃爍
第4步：它將轉到"正在掃描"，然後"正在連接"。
第 5 步：等待附加路由器的系統 LED 變成藍色常亮，然後重新定位 WR2100。
第 6 步：成功並享受網狀網路。
註：
1. 4/5G 路由器只能設定為主網單元。例如：
2.您將無法登入附加網狀路由器的 Web 介面。如果您想要變更設置，請點選"系統狀態"->"網格"。
79 則留言
Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(
@Maciek
Dear Customer，
Thank you for contacting Cudy support team.
Sorry for the inconvenience caused to you! We have plan to add this feature next months via firmware update. It will come soon. Please wait patiently.
“The WR3600 router with the latest firmware does not have the Mesh WiFi feature.”
The WR3600 router with the latest firmware does not have the Mesh WiFi feature.
@Ahmed,
Dear Ahmed,
Sorry to tell you that WR6500 doesn’t support Mesh function now. We have plan to add this feature next month. Please wait. For now, if you plan to connect them via wired cable, you can set the WR3000 to the Access Point mode, then connect to the WR6500’s LAN port. If you plan to connect them via WiFi, you can set the WR3000 to the Wireless extender mode to connect the 5GHz WiFi of WR6500. It will work too. Then you will be able to update the new firmware to support mesh function when the new firmware release.
“I want to setup a mesh network between wr6500 (main) and my old wr3000 (satellite) but there’s no + sign on the setup page for the wr6500.
Is it possible to add that feature? If not available already and I just can’t find it. Because it’s mentioned on the product page for the wr6500 that it supports whole home mesh.”
I want to setup a mesh network between wr6500 (main) and my old wr3000 (satellite) but there’s no + sign on the setup page for the wr6500.
Is it possible to add that feature? If not available already and I just can’t find it. Because it’s mentioned on the product page for the wr6500 that it supports whole home mesh.