Cudy LTE路由器配备LAN/WAN端口，因此我们可以更改端口的工作模式，并将4G/5G网络用作备用网络连接方案。当LAN/WAN端口工作在WAN模式时，如果原有网络服务出现故障，路由器将自动连接到4G/5G网络。
常见网络拓扑结构：
步骤 1：确保 4G/5G 网络已成功设置。
步骤 2：打开网页浏览器，访问http://cudy.net或http://192.168.10.1 。
步骤 3：进入高级设置-> LAN/WAN 交换机。
步骤 4：点击“切换到 WAN ”，然后路由器将重启并应用设置。
步骤 5：将路由器的LAN/WAN端口连接到调制解调器或网络端口。
注意：请确保您已拥有调制解调器，或者您的互联网连接是通过以太网接口实现的。
步骤 6：配置完成后，您将在系统状态页面中看到以下状态。
18 条评论
The WAN feature is not functioning, diagnostic tool says the IP address must be provided, but the router is not automatically detecting the IP address and I do not have the IP address from the ISP. Please help.
@EZEQUIEL
Our technical support has contact you via email.
“Is not working, I made this, then disconnect the internet cable of my router but cudy backup do not give 4g/5g backup to the people connected to the LAN… is very important for us to make this work, is there more information?”
Is not working, I made this, then disconnect the internet cable of my router but cudy backup do not give 4g/5g backup to the people connected to the LAN… is very important for us to make this work, is there more information?