Cudy LTE路由器配备LAN/WAN端口，因此我们可以更改端口的工作模式，并将4G/5G网络用作备用网络连接方案。当LAN/WAN端口工作在WAN模式时，如果原有网络服务出现故障，路由器将自动连接到4G/5G网络。
常见网络拓扑结构：
步骤 1：确保 4G/5G 网络已成功设置。
步骤 2：打开网页浏览器，访问http://cudy.net或http://192.168.10.1 。
步骤 3：进入高级设置-> LAN/WAN 交换机。
步骤 4：点击“切换到 WAN ”，然后路由器将重启并应用设置。
步骤 5：将路由器的LAN/WAN端口连接到调制解调器或网络端口。
注意：请确保您已拥有调制解调器，或者您的互联网连接是通过以太网接口实现的。
步骤 6：配置完成后，您将在系统状态页面中看到以下状态。
18 条评论
@Khushbakht
Dear Customer.
Thank you for contacting Cudy support team.
Sorry to tell you that the router doesn’t support this function now. We will provide your feedback to the product department for evaluation.
“Can the Cudy LT500 router be configured to notify me when the main channel is switched off? Notifications by SMS.”
Can the Cudy LT500 router be configured to notify me when the main channel is switched off? Notifications by SMS.
@Peter,
Dear Peter,
For now, Cudy router doesn’t support this feature.
“How can i change the settings to make a WAN to backup if the 4G network is failed?!”
How can i change the settings to make a WAN to backup if the 4G network is failed?!
DAVID Please contact the problem to supportcudy.com
“The WAN feature is not functioning, diagnostic tool says the IP address must be provided, but the router is not automatically detecting the IP address and I do not have the IP address from the ISP. Please help.”