WISP 模式：
在 WISP 模式下，路由器允许多个用户共享来自 WISP 的互联网连接。以这种方式，LAN 端口设备通过无线端口共享来自 WISP 的相同 IP。当连接到 WISP 时，无线端口用作 WAN 端口。
常见网络拓扑：
步骤 1： 打开 Web 浏览器并转到 http://cudy.net 或者 http://192.168.10.1 。
详情请参阅 如何登录 Cudy Router 的 Web 界面？
第 2 步： 将弹出快速设置窗口，选择“ WISP ”，然后转到“下一步”。
步骤3： 选择您的“时区”。
步骤4： 选择要扩展的主机网络。单击“连接” 。
或点击 常规设置-> WISP ->启用 然后选择要扩展的主机网络。
步骤5： 输入主机网络的无线密码。
笔记： 请确保您输入的无线密码正确，否则配置无法成功。
第 6 步： 自定义无线网络名称和密码或保持默认。
步骤7： 单击“保存并应用”完成配置。
步骤8： 等待系统重新启动几秒钟，当再次弹出登录页面时，您就可以享受互联网了。
120 条评论
@Dear Jon,
1. We suggest you to use the WISP mode. And bind the MAC address of the TR3000.(You need to check the WiFi mac address first) You can connect it to your existing WiFi network first, then check the WiFi MAC address of the WISP interface on the WiFi client list of the exist WiFi’s WEB page.
2. I can’t for sure about it. If the Portal Wi-Fi has no limit. It will work.
3. For now, TR3000 doesn’t support MAC clone function. We will try to develop this function in future.
“For sharing hotel or cruise ship Captive Portal Wifi when they only allow 1 device to connect but you want the TR3000 to allow multiple personal devices to connect is WISP mode the recommended mode? Does this work with Captive Portal on the hotel/cruise ships side? If so how do you configure MAC address cloning so the router uses my iPhone’s MAC address?”
@Dear Z
We just sent you again. Please check.
“Thank you, no email received for now”
I have a problem setting up wisp mesh network – Cudy doesn’t see my 5G wifi network, only 2g. therefore the speed is low if I do mesh with WIPS 2g, I can’t find my 5g network, my laptop, phone etc see this network. Cudy – no. Pls help
For sharing hotel or cruise ship Captive Portal Wifi when they only allow 1 device to connect but you want the TR3000 to allow multiple personal devices to connect is WISP mode the recommended mode? Does this work with Captive Portal on the hotel/cruise ships side? If so how do you configure MAC address cloning so the router uses my iPhone’s MAC address?
Thank you, no email received for now