WISP 模式：
在 WISP 模式下，路由器允许多个用户共享来自 WISP 的互联网连接。以这种方式，LAN 端口设备通过无线端口共享来自 WISP 的相同 IP。当连接到 WISP 时，无线端口用作 WAN 端口。
常见网络拓扑：
步骤 1： 打开 Web 浏览器并转到 http://cudy.net 或者 http://192.168.10.1 。
详情请参阅 如何登录 Cudy Router 的 Web 界面？
第 2 步： 将弹出快速设置窗口，选择“ WISP ”，然后转到“下一步”。
步骤3： 选择您的“时区”。
步骤4： 选择要扩展的主机网络。单击“连接” 。
或点击 常规设置-> WISP ->启用 然后选择要扩展的主机网络。
步骤5： 输入主机网络的无线密码。
笔记： 请确保您输入的无线密码正确，否则配置无法成功。
第 6 步： 自定义无线网络名称和密码或保持默认。
步骤7： 单击“保存并应用”完成配置。
步骤8： 等待系统重新启动几秒钟，当再次弹出登录页面时，您就可以享受互联网了。
120 条评论
Both Pavel and I encountered the same issue in WIPS mode, where the device fails to connect to most 5GHz Wi-Fi networks. I saw that support recommended using channels 36–48 (UNII-1). May I ask how to connect to channels 52–64 (UNII-2) and 100–144 (UNII-2 Extended)? Many 5GHz Wi-Fi networks in Hong Kong operate on the 100–144 range. I am using the TR1200 V1 with firmware version 2.4.15 CN.
WR3600H or add OpenWRT or finish the firmware with a working WISP? I got my hands on beta 2.3.11 which has WISP but there are a lot of bugs that are impossible to live with. Give me a real time frame for the release of a working firmware with WISP or WRT so that I can either return your router or wait for a working firmware.
@Dear TH,
TR3000 doesn’t support connecting to the PEAP Wi-Fi network currently. We will feed back this to Cudy R&D team to evaluate if we can support in future.
“I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?”
I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?
@Dear Pavel,
I think it is related to the 5G WiFi channel. Please set the 5GHz channel of your existing WiFi to one of the 36-48, then check if the problem fixed?
“I have a problem setting up wisp mesh network – Cudy doesn’t see my 5G wifi network, only 2g. therefore the speed is low if I do mesh with WIPS 2g, I can’t find my 5g network, my laptop, phone etc see this network. Cudy – no. Pls help”