WISP 模式：
在 WISP 模式下，路由器允许多个用户共享来自 WISP 的互联网连接。以这种方式，LAN 端口设备通过无线端口共享来自 WISP 的相同 IP。当连接到 WISP 时，无线端口用作 WAN 端口。
常见网络拓扑：
步骤 1： 打开 Web 浏览器并转到 http://cudy.net 或者 http://192.168.10.1 。
详情请参阅 如何登录 Cudy Router 的 Web 界面？
第 2 步： 将弹出快速设置窗口，选择“ WISP ”，然后转到“下一步”。
步骤3： 选择您的“时区”。
步骤4： 选择要扩展的主机网络。单击“连接” 。
或点击 常规设置-> WISP ->启用 然后选择要扩展的主机网络。
步骤5： 输入主机网络的无线密码。
笔记： 请确保您输入的无线密码正确，否则配置无法成功。
第 6 步： 自定义无线网络名称和密码或保持默认。
步骤7： 单击“保存并应用”完成配置。
步骤8： 等待系统重新启动几秒钟，当再次弹出登录页面时，您就可以享受互联网了。
120 条评论
@Dear Daniel,
I just tested it. WR1500 takes about 1 minute to reconnect to the main Wi-Fi.
“I was curious about WISP reconnection time on WR1500. I plan to use phone wifi hotspot as WISP source. Can i expect immediate connection once i turn on phone hotspot? How long does it take to find my phone and connect to it? Also, if connection is lost, how fast cudy will reconnect to phone hotspot once it turned on again?”
I was curious about WISP reconnection time on WR1500. I plan to use phone wifi hotspot as WISP source. Can i expect immediate connection once i turn on phone hotspot? How long does it take to find my phone and connect to it? Also, if connection is lost, how fast cudy will reconnect to phone hotspot once it turned on again?
@Dear Wills,
Our technical support has sent you the firmware via email. Please check.
“Hi, can you send me WISP firmware for WR3600? thanks!”
Hi, can you send me WISP firmware for WR3600? thanks!
@Dear Wisperer,
OK. I see. The new firmware for WR3600 is under testing. We will release new firmware recently. Please wait patiently.
“Hi Cudy Support.
Im using already the Beta Firmware 2.5.5b for my WR3600 1.0 for being able to use WISP.
I found a Little bug:
Through the Cudy App i can disable WIFI completely but when trying to enable it again I get „invalid params“ error and it doesn’t get enabled again.
Through the webinterface, everything works.
Is there maybe a newer beta than 2.5.5b that addresses this issue already? Or when will there be official 2.5.X firmware?
If there is newer firmware can you provide please?!
Thank you"