ดาวน์โหลดซอฟต์แวร์ OpenWrt

คำเตือน

หน้าเว็บนี้แสดงรายการซอฟต์แวร์ของอุปกรณ์ที่รองรับระบบ OpenWrt ก่อนที่จะดาวน์โหลดและติดตั้งซอฟต์แวร์ โปรดทราบว่า OpenWrt Project เป็นระบบปฏิบัติการ Linux ที่กำหนดเป้าหมายไปที่อุปกรณ์ฝังตัว แทนที่จะพยายามสร้างเฟิร์มแวร์แบบคงที่เพียงตัวเดียว OpenWrt มอบระบบไฟล์ที่สามารถเขียนได้อย่างสมบูรณ์พร้อมการจัดการแพ็คเกจ ซึ่งช่วยให้คุณไม่ต้องเลือกแอปพลิเคชันและการกำหนดค่าที่ผู้จำหน่ายให้มา และช่วยให้คุณปรับแต่งอุปกรณ์ผ่านการใช้แพ็คเกจเพื่อให้เหมาะกับแอปพลิเคชันใดๆ สำหรับนักพัฒนา OpenWrt เป็นเฟรมเวิร์กสำหรับสร้างแอปพลิเคชันโดยไม่ต้องสร้างเฟิร์มแวร์ที่สมบูรณ์ สำหรับผู้ใช้ นี่หมายถึงความสามารถในการปรับแต่งได้อย่างเต็มที่ เพื่อใช้อุปกรณ์ในแบบที่ไม่เคยคิดมาก่อน

คำอธิบาย

  1. ไฟล์นี้สามารถใช้ได้เมื่อเราเตอร์ของคุณทำงานภายใต้ Cudy web UI เท่านั้น
  2. หากเราเตอร์ทำงานภายใต้ OpenWRT UI อยู่แล้ว ผู้ใช้ควรคืนค่าเป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ก่อน จากนั้นอัปเกรดเราเตอร์ด้วยเฟิร์มแวร์นี้
  3. จะคืนค่าเราเตอร์เป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ได้อย่างไร โปรดอ่าน readme ในไฟล์ที่ดาวน์โหลด

การรับประกัน:

คิวดี้ขอประกาศ

  1. เรา Cudy ไม่รับประกันซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
  2. เราไม่รับประกันใด ๆ สำหรับผลิตภัณฑ์ที่ติดตั้งซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
  3. หากคุณต้องการใช้ซอฟต์แวร์ openwrt เราขอแนะนำให้คุณดาวน์โหลดจากเว็บไซต์อย่างเป็นทางการของ Cudy

ดาวน์โหลดเฟิร์มแวร์ OpenWrt เพื่อลบการตรวจสอบลายเซ็น: ไดรฟ์

เครื่องมือค้นหาเฟิร์มแวร์ OpenWrt (ไม่เผยแพร่โดย Cudy): ตัวเลือกเฟิร์มแวร์ OpenWrt 

กลับไปยังบล็อก

462 ความคิดเห็น

TFTP exe in TR3000 V1.zip is flagged as trojan horse this is very bad!!!!

na

Hello Cudy Support,

I need intermediate OpenWRT firmware for WR1300 V3.0 model to remove signature check. The direct OpenWRT factory image gives “File is invalid” error when trying to flash.

Could you please provide the intermediate firmware file for WR1300 V3.0?

My router details:
- Model: WR1300 EU 3.0
- Current firmware: Firmware Version
2.2.6-20240815-095128

Hardware
WR1300 V3.0

Thank you!

Aleksandar Bakalov

@Marek M,
Would you please list the models that need downgrade the firmware? We will fix these models first.

“Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!”

Support

@Dear Marek M.
Thank you for contacting Cudy support team. Thank you for your kindly advice. We will provide your feedback to the product department for evaluation. I think we will do better about this.

“Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!”

Support

@cruday,
Our technical support has sent you the firmware via email. Please check.

“hi, I need cudy_ap3000indoor-v1-sysupgrade.bin…outdoor doesnt work”

Support

แสดงความคิดเห็น