จะตั้งค่า Guest Network บนเราเตอร์ Cudy ได้อย่างไร?

Здравствуйте.
приобрёл M1800 V2.0, при использовании гостевой сети видна внутренняя сеть: пингуются устройства и есть доступ к внутренним сетевым ресурсам.
как это исправить ?

@Dear tonalt,
Our technical support has sent you the solutions via email. Please check.

“it seems that an activated mac-filter also has an effect on the guest-network in the sense that the router doesn’t connect a guest to the internet! LT700E.
i think most people don’t like this and even worse: the activated mac filter on the guest network is not editable and it even worser it doesn’t use the mac table that is defined for the main wifi network.
so the mac filter is completely useless if one allows a guest-network.
probably i am wrong and the guest network can connect a guest to the internet with an activated mac-filter. but if so, please tell what i can do, to achieve this.”

it seems that an activated mac-filter also has an effect on the guest-network in the sense that the router doesn’t connect a guest to the internet! LT700E.
i think most people don’t like this and even worse: the activated mac filter on the guest network is not editable and it even worser it doesn’t use the mac table that is defined for the main wifi network.
so the mac filter is completely useless if one allows a guest-network.
probably i am wrong and the guest network can connect a guest to the internet with an activated mac-filter. but if so, please tell what i can do, to achieve this.

@Dear John,
You will find the Guset Network function if you set the router to work on Wireless Router mode or WISP mode. There is no Guset Network function if you set the router to work on other modes.

“WR1300
No Guest network button available
Firmware 2.4.4”

WR1300

No Guest network button available

Firmware 2.4.4