Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Общие настройки 🡢 VPN и переведите переключатель Включить в подразделе VPN во включённое положение.
Чтобы включить (отключить) VPN для конкретных устройств, перейдите в раздел Состояние системы 🡢 Устройства и переведите переключатель VPN напротив нужного устройства в нужное положение.
Шаг 3. В выпадающем списке параметра Протокол выберите нужный протокол и настройте параметры согласно указаниям поставщика VPN-услуг.
PPTP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя и пароль, предоставленные поставщиком VPN-услуг.
L2TP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя, пароль и ключ PSK, предоставленные поставщиком VPN-услуг.
Если поставщик VPN-услуг также предоставляет IP-адрес для привязки учётной записи, активируйте параметр Использовать пользовательский IP-адрес туннеля.
OpenVPN
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
WireGuard
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
Поля подразделов Интерфейс и Одноранговый узел будут заполнены автоматически с помощью файла настроек (CONF) поставщика VPN-услуг.
ZeroTier
Введите нужные значения в поля Идентификатор сети ZeroTier и Шлюз.
Комментариев: 196
How can clear cache of vpn settings wireguard client, not hard reset of router, because when I try to setup another country wireguard client and load config file of new file from vpn company, can’t load new file settings. Had old fields inside.
@Dear Xara,
I have an idea. If some device doesn’t use the VPN, you can enable the Guest network. Then connect the device to the Guest network. What do you think?
“I have a cudy WR3600H with vpn wireguard installed and kill switch On. Vpn works great. But when i turn off the vpn from a connected device it also loses connectivity to the internet. When i turn completely off vpn all devices connect to internet.”
@Dear BARTLAL,
I have an idea. If some device doesn’t use the VPN, you can enable the Guest network. Then connect the device to the Guest network. What do you think?
“hi to all,
i have a WR3600 V1.0, FW: 2.3.12-20250612-115717
and i am trying to set up a VPN, (openVPN client).
the status is connected, and it is working as VPN.
BUT, at system status >>> devices, whatever is the position for the VPN switch, all devices are ALWAYS through the VPN.
That means i cannot control which devices will have VPN and which not.
do you have any ideas to help me?”
@Querido Rafa,
Gracias por su amable consejo. Transmitiremos sus comentarios al departamento de productos para su evaluación.
“Hola, ¿hay alguna previsión de en algún momento incluir soporte de Tailscale?, concretamente en los modelos WR3600 y WR3600E que son de los que dispongo, para mí sería un punto muy a favor y espero que algún día lo implementen. Gracias y un saludo.”
hi to all,
i have a WR3600 V1.0, FW: 2.3.12-20250612-115717
and i am trying to set up a VPN, (openVPN client).
the status is connected, and it is working as VPN.
BUT, at system status >>> devices, whatever is the position for the VPN switch, all devices are ALWAYS through the VPN.
That means i cannot control which devices will have VPN and which not.
do you have any ideas to help me?