Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Общие настройки 🡢 VPN и переведите переключатель Включить в подразделе VPN во включённое положение.
Чтобы включить (отключить) VPN для конкретных устройств, перейдите в раздел Состояние системы 🡢 Устройства и переведите переключатель VPN напротив нужного устройства в нужное положение.
Шаг 3. В выпадающем списке параметра Протокол выберите нужный протокол и настройте параметры согласно указаниям поставщика VPN-услуг.
PPTP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя и пароль, предоставленные поставщиком VPN-услуг.
L2TP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя, пароль и ключ PSK, предоставленные поставщиком VPN-услуг.
Если поставщик VPN-услуг также предоставляет IP-адрес для привязки учётной записи, активируйте параметр Использовать пользовательский IP-адрес туннеля.
OpenVPN
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
WireGuard
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
Поля подразделов Интерфейс и Одноранговый узел будут заполнены автоматически с помощью файла настроек (CONF) поставщика VPN-услуг.
ZeroTier
Введите нужные значения в поля Идентификатор сети ZeroTier и Шлюз.
Комментариев: 196
@Dear Ginio,
Our technical support has contacted you via email. Please check.
“I have a WR3000S acting as a WireGuard server in my main house. In my secondary house, I have a TR3000 as a WireGuard client. The IP range on my main house is 192.168.5.1, and on the other, it’s 192.168.1.1.
I’ve already configured the WireGuard server on the WR3000S for the secondary house client with the remote subnet 192.168.1.0/24, and on the TR3000, I’ve configured the WireGuard client site-to-site configuration.
If I connect to the PC in the secondary house, the connection is through the VPN, and I can access any machine in the main house. However, I can’t access the cameras I have in the secondary house from the PCs in the main house."
I have a cudy WR3000 with vpn wireguard installed and kill switch On. Vpn works great. But when i turn off the vpn from a connected device it also loses some connectivity to the internet – some sites load and others don’t! When I turn completely off vpn all devices connect to internet. Is there a way around this as the sites that don’t load are important? This is the case for wired lan and wifi connected devices.
I have a WR3000S acting as a WireGuard server in my main house. In my secondary house, I have a TR3000 as a WireGuard client. The IP range on my main house is 192.168.5.1, and on the other, it’s 192.168.1.1.
I’ve already configured the WireGuard server on the WR3000S for the secondary house client with the remote subnet 192.168.1.0/24, and on the TR3000, I’ve configured the WireGuard client site-to-site configuration.
If I connect to the PC in the secondary house, the connection is through the VPN, and I can access any machine in the main house. However, I can’t access the cameras I have in the secondary house from the PCs in the main house.
@Dear George,
Our technical support has contacted you via email. Please check.
“How can clear cache of vpn settings wireguard client, not hard reset of router, because when I try to setup another country wireguard client and load config file of new file from vpn company, can’t load new file settings. Had old fields inside.”
Ask for wr3000 with last firmware , about clear cache vpn settings only.